Interested to Buy Any Domain ? << Click Here >> for more details...
how electical engineer is related to apsrtc (general) post?
if they ask a question in interview as why did u choose
this job what shd be answer
- 0 Answers
- 2222 Views
- I also Faced
- E-Mail Answers
No Answer is Posted For this Question
Be the First to Post Answer
How to decide DO set rating of Transformer?
WHY BREAKER ARE USED IN SUBSTATIONS?
explain how the power is distributed from a power plant to a consumer.explain step wise in detail
electricity bill multiplication factor 487.20xconsumption=total unit in kwh. what is 487.20 ?
why would amp draw on neutral wire be as much as amp draw on the hot leg.
Can an inverter be used as a converter? How?
If u take a kWh reading in 11 kV HT and 440 LV side at same time in yesterday today , then why LT consumed units 3-4℅ high as compared to HT units
why ct mensioned 0.5/5p20 plese any reply to me
can i connect the two phases of scott connected transformer,if not why?
which bulb is greater iluminited, 60w and 100w are conected in series?
In any plant or substation main incommer voltage RY - 415 V,YB - 400 V, BR - 387 V(in commer feed from transformer 11 Kv /0.415 KV) why found voltage differance in each phase? plant have not self power plant it is depend on outsource grid
Why we use 2core cable for Dc motor.Can I use 3core?
5 Answers JK Paper, Maharaja Whiteline,
-
Civil Engineering (5086) - Mechanical Engineering (4456)
- Electrical Engineering (16639)
- Electronics Communications (3918)
- Chemical Engineering (1095)
- Aeronautical Engineering (239)
- Bio Engineering (96)
- Metallurgy (361)
- Industrial Engineering (259)
- Instrumentation (3014)
- Automobile Engineering (332)
- Mechatronics Engineering (97)
- Marine Engineering (124)
- Power Plant Engineering (172)
- Textile Engineering (575)
- Production Engineering (25)
- Satellite Systems Engineering (106)
- Engineering AllOther (1379)
