why the transmission side of the generating transformer is
always star??
Answers were Sorted based on User's Feedback
Answer / hari krishna maganti
we r not useing always 2 or 3 phase suply..
for singie phase suply neutral is must.....
Is This Answer Correct ? | 3 Yes | 2 No |
For transmitting the power generating substation transformer should connect delta star for step up at high voltage also getting ground wire for reducing third harmonic current in transmission line.
Is This Answer Correct ? | 0 Yes | 0 No |
Answer / bhramit agarwal
bcoz ie is in star per phase voltage is 1/3^1/2 times the line voltage.so overall voltage decreases.and loss in a line is decreased.
Is This Answer Correct ? | 2 Yes | 3 No |
Answer / suresh apgenco
to provide path for third harmonic currents and as line
voltage is equal to phase voltage, size of the conductor
will reduce.
Is This Answer Correct ? | 1 Yes | 3 No |
Answer / prateek negi
BCOZ STAR POINT GENERATES NEUTRAL AND ELECTRICITY IS
DIDTRIBUTED IN THAT FORM WITH 3 PHASE AND ONE NEUTRAL
Is This Answer Correct ? | 2 Yes | 7 No |
which one has maximum efficiency autotransformer or transformer?? and why??
who is invented transforner (230v).......
Why it need to form a capcitor when it not been in use from three or two year. Plz describe it technically.
How to check op amp using multimeter
What is the difference between magnetic loading and electric loading of a machine?
HELLO EVERYONE, I RECENTLY HAVE FOUND ONE PROBLEM, I WAS TAKING NO LOAD TRIAL OF AN HT MOTOR 920 MOTOR , 1440 RPM , 6.6 KV, WITH AUTO TRANSFORMER. AT 450 V, LOAD WAS 40 AMP AND SPEED WAS 250 RPM. BUT AS WE INCREASE VOLTAGE FROM 450 TO 480V, LOAD BECOME 41 AND SPEED REDUCED TO SOME RPM . SO WHICH PHENOMENON ACTED HERE FOR REDUCING SPEED.?? AND IS IT HAPPENING ALWAYS OR IT IS RARE? I ALSO HAVE FACED SUCH PROBLEM WITH FEW LT MOTOR ALSO.
what is the difference in inductance and resistance.both oppose the flow of current but how.resistance having + ve power in both cycle while inductance having both power.
What are eddy current and define rms value?
difference b/w current and voltage relay?
why one pin of plug pin is longer than other two? In some mobile chargers one pin is made not conducting .Why?
how much power consumed by 1.5 ton capacity split A.C in 1 hour
60 watts bulb and resistor home heater is connected in series and 230v is given to the circuit. The heater is giving some amount of heat. If instant of 60 watts bulb replace 100 watts bulb what will be the output of the heater?