Answer / nhv

generally P, R, S and J type towers are there.

Answer / sachin & amit

four types

what is the reqirred voltage in HT motor to get full RPM on no load test?

0 Answers  

---

what difference between tapping -15% to +5 % and -5% to +15% tap. & how can define HV turns on maximun & minimum tap of power transformer.

2 Answers  

---

how we will deside the high voltage value

0 Answers  

---

How to decide the rating of CBCT? We have 6.6Kv switchgear & having 50/1 cbct ,i want to know how this 50/1 A came? On what basis we decide CBCT reting?

1 Answers   Cross,

---

i am gng to visa interview this july i have 4 backlogs gre 1010,toefl 75,pls give me the tips pls pls

0 Answers  

---

---

A 50Hz,4-pole,3-phase,star-connected synchronous motor has a synchronous reactance of 12ohmsper phase and negligible armature resistances.the excitation is such as to give an open-circuit voltage of 13.2kilovolt.the motor is connected to 115kilovolt, 50hertz supplying. what maximum load can be the motor torque,line current and power factor?

0 Answers  

---

1. Why a DC motor starter is called 3 point starter

21 Answers   ABB, CG, College School Exams Tests, Crompton Greaves, Infosys, Siva,

---

what is the differences between single phase ind. motor and three phase ind.motor?

3 Answers  

---

1. What is differential relay? How it operates? 2.How to calculate the Short Circuit Impedance in Transformer? 3.What is the alternate solution for testing of polarity by using polarity tester while its milli ammeter does not works? 4. While testing the 33KV Busbar by using Hipot kit, what should be the test voltage we have to apply? 5. What is the procedure/activities to be taken to inject the current more than 2000A by using 2000A Loading Transformer? 6. Explain how you can give the overload setting to any Motor Protection Relay for a HT motors with formula and example? 7. Why restricted earth fault protection is needed? Why can’t differential Protection is sufficient? 8. What should be the minimum and maximum ohmic value for earthing? 9. Why DC Currents are not used in transformer? 10. What is the Frequency while we step up the voltage from 220V to 11KV? Is it possible? Explain it?

0 Answers  

---

what is the difference between high impedance REF & REF, same high impedance differential protection & differential protection for Power transformer?

1 Answers  

---

What is the physical significant of power factor?

0 Answers   Cooper,

---

If a rotary UPS is in line through grid power; What would be the impact on Power Factor if the load through rotary ups is 25% , 50% , 75% & 100%. Will the power factor reduce with less load?

0 Answers  

---