WHAT IS THE DG OIL SPECIFICATIONS AND WHAT IS THE
DIFFERENCE BETWEEN THE DG OIL AND TRANSFORMER OIL
Answers were Sorted based on User's Feedback
DG lube oil Specification is 15W/40
Difference between DG oil and Transformer oil is
DG oil is used for lubricating purpose because in DG Engine
lot of rotating parts are there,
Transormer oil Specification is 40KV and it is mineral oil
we are using oil in transformer for insulating and cooling
purpose
Is This Answer Correct ? | 18 Yes | 3 No |
Answer / sanjay
DG lube oil Specification is 15W/40,also it acts lubricants,
Transormer oil Specification is as per IS 335 and it is
mineral oil insulating and cooling&minimise the size of
transformer
Is This Answer Correct ? | 5 Yes | 0 No |
Answer / saravanakumarsolairaj
DG oil specifications is API CF,CF4 and upto CI4 for the diesel generators and viscosity grades suchas SAE 15W40 ,20 w 40 20W50,40,50 etc..to suite the environment.
DG oil is Crankcase lubricating oil.
Transformer oil is Insulating oil.
Is This Answer Correct ? | 2 Yes | 0 No |
Answer / khan rehan
15w/40 oil is very smooth that's way we can use in DG because in DG so many moving parts .and transformer oil work as a insulater between winding and tank.
Is This Answer Correct ? | 2 Yes | 0 No |
Alternating voltage and current is which type of quantities?
IF alternator SCR value will be high means what happen in alternator efficency at operating power factor of 0.8
what is the role of frequency in electrical system
Why power factor does not occur in DG set ?
why mccb is not tripping when phase & neutral terminal are interched ?
WHY IS THE NO LOAD CURRENT SMALL FOR A TRANSFORMER COMPARED TO OTHER ROTATING ELECTRICAL MACHINES??
What happens to a motor if it is connected in Delta connection
The unit of resistivity is:(a) ohms(b) ohm millimetre(c) ohm metre(d) ohm/metre
How much allowable difference current between on three phases Dear sir, We have a 1870 KW HT motor, 11 Kv supply,FLA-120A,2870 rpm,2-pole squirrel cage induction Motor.And stator is connected in star connection with Liquid resistance stater to limit the starting current.It has coupled with Centrifugal air compressor.My question is it is loading 73% of FLA taking R-phase 86.7 A, Y-phase-85.4A,B-phase- 78.3A.why the B phase current is that much of difference.Is it allowable, or any one tell me how much allowable current.If any method to calculate.
Which of the following can be operated at higher frequencies ? -SCR -MOSFET -IGBT
Merits & Demarits of Oil circuit & Air circuit breakers ?
what is relation betn. KW & KV?