Interested to Buy Any Domain ? << Click Here >> for more details...
-
Civil Engineering (5086) - Mechanical Engineering (4456)
- Electrical Engineering (16639)
- Electronics Communications (3918)
- Chemical Engineering (1095)
- Aeronautical Engineering (239)
- Bio Engineering (96)
- Metallurgy (361)
- Industrial Engineering (259)
- Instrumentation (3014)
- Automobile Engineering (332)
- Mechatronics Engineering (97)
- Marine Engineering (124)
- Power Plant Engineering (172)
- Textile Engineering (575)
- Production Engineering (25)
- Satellite Systems Engineering (106)
- Engineering AllOther (1379)
What have you done to improve or develop your knowledge / professional qualifications in the last year?
2754In RTU Panel we are having several Analogue & Digital Inputs /Outputs. We are recently facing some problems over Analog inputs , which are not updating properly (But Digital Input are updating normally) Can any one tell me from where the problem is creating , we have checked PLC CPU card, Analog Input card & we reconfigured ,But still the issue is there. Issue : 1. Sometimes Analog values are updating & sometimes not. 2. Analog values are not updating normally , showing some wrong Values 3. Total dead (0 value) Analog values are Level & flow measurement from the field instruments. (But in field the instruments are working normally & Displaying the values normally in local display unit) This problem we are facing in our Water Plant. If any one experienced this same problem or having any ideas related to our issue PLS send your valuable Answers/Replies...
L&T,
6 8725.We want to compare the performance of a single threaded disk server with a multithreaded 1. Suppose the server takes 25 ms to receive a request for work from client, dispatch the request for processing and actual data request processing when reqd. Data is in main memory. If the reqd. Data is not in the main memory a real disk operation is needed and an additional 75 ms are reqd. On the average. On the average 25% of the clients requests access the disk. During the disk I/O period the thread waits. Assume that there is no other process in system when the server is running. How many requests can the server handle per second if its a)single threaded b)multithreaded
1957A thread has to access the address space of all other threads in the same process and can therefore mess up the stacks of other threads. Why is this not a protection problem? Could the same be allowed to occur for processes, e.g. one process writing data into the stack of other.
HCL,
1938
What is “pu” in ee?
What are the effects of oils on the properties of Polyolefins?
what is the difference between fire grate in a boiler and the burner? and is the fire grate is the furnace of the boiler?
What is solenoid valve? Where it is used?
what is diff. between earthing grid,earthing mess, earting grid?
If the earth is a good conductor of electricity, why don't people get shocked every time they walking on earth?
High speed gear is obtained in the case of sliding mesh gear box when a) Motion is transferred through the clutch gear to lay shaft gear b) Main shaft is coupled to the clutch shaft c) Smallest gear on the lay shaft is engaged d) Largest gear on the lay shaft is engaged
A ii kv 1200 A Breaker combination fixed in a cubicle. How many ampere Fuse is required? If fuse is not using, Why?
give me the mix proportion for design mix concrete M 7.5 grade 1:4:8
How much permissible bearing capacity requires for open footings(isolated) and what type pile foundatuon prefering for coastal areas?
Explain why is the diffusion technique of formation of resistor most widely used?
How you can distinguish between 2S and 4S engine?
i want to know how a dg set run/works and what is strock and what difference in between two and four strock engine.
For what purpose bedding is used under storm water drains, explain?
In how many types u can do POP on ceiling and walls(on which material or by using which material)? b) what is the difference between dry , oil bound, enamel, acrlyic type of painting?
