why there is a temperature rise at different metal to metal contact at cable lug??suppose cable is aluminium and the lug is copper,than why the temperature rise takes place??
2 4756For a high pressure/ high temperature multistage pump (Boiler Feed Water Pump), what is the average life of mechanical seal? Does life of DE and NDE differ, if differ, how much? Why?
1981Required concret Surface Temperature prior to coating of epoxy pain with references ASTM or ACI whatever
2191effect of temperature on stainless steel at temp(500C-750C) in respect of the following properties-required for silencer application 1.thermal conductivity 2.heat conduction 3.mechanical strength 4.temperature to weight ratio with values
1867effect of temperature on stainless steel,aluminized steel,chromium at (500C-750C)-required for project work on silencer 1.thermal conductivity 2.heat conduction 3.mechanical strength 4.temperature to weight ratio urgent
1805In Rankine Cycle we use the concept of Tm(mean temperature of heat addition).In actual cycle the efficiency comes as n=1-T2/T1 Taking Tm into consideration it comes as n=1-T2/Tm as T1>Tm so the efficiency for both case will not same for a same cycle. Can anybody explain how it is possible? Advance appreciation for your effort.Thanks
Sail,
3117
How does Vbe and Ic change with temperature?
what are the microbes that grow if proper temperatures are not maintained during fermentation process?
At what temperature should fresh sweet potato leaves be stored and dried?
How the plants can survive in Tundra where temperature reaches -57oC?
I currently use 17-7 PH stainless which is hardened to condition CH after forming. raw matl is .1.75"X .12" X .008". Its main usage after hardening is silicon wafer retainer where it's contantly cycled up and down to putin and remove wafer after 40-60 sec process at 400C temp. At this high temperature this part seemed to deform after a a couple of hundred wafer which is what it was designed for in the first place. THere is a proposal to go to a different material to increase lifeline of this part. My question is..... can 321 SST be a plugin replacement. I know this has a higher temp rating but how about its forming characteristics, will it have spring properties, and wont become brittle after prolonged exposure to 400C.
Design a program which assigns values to the array temperature. The program should then display the array with appropriate column and row headings.
An ice-box is built of wood 1.75 cm thick, lined with cork 3 cm thick. If in the steady state the temperature of the inner surface of the cork is 0 ºC and that of the outer surface of wood is 12 ºC, what is the temperature of the wood-cork interface? The thermal conductivities of wood and cork are 0.2 W/m-K and 0.04 W/m-K respectively
What is the temperature PROFILE OF A FLUID W. R. T. Distance from a sphere to which it is IN CONTACT which is at constant temp.?
In which working principal temperature transmitter work.explain in detailed.
hii..i am doin a project called Forecaster..wat it does is it asks user to enter a zip code..then it establishes urlconnection with a weather website n fetches data n data is converted into graphical representation..but it doesnt show any output..i am not able it figure out the reason..can u plzzzz help me out..i am givin u code import java.io.*; import java.awt.*; import java.net.*; import java.awt.image.*; import java.awt.event.*; public class Forecast extends Frame { OkCancelDialog textDialog; BufferedImage image = null; public static void main(String[] args) { new Forecast(); } public Forecast() { String zip =""; File zipFile = new File("zip.txt"); String hiTemperature[] = new String[4]; String loTemperature[] = new String[4]; try { if(zipFile.exists()){ FileReader filereader = new FileReader("zip.txt"); BufferedReader bufferedreader = new BufferedReader(filereader); zip = bufferedreader.readLine(); } else { textDialog = new OkCancelDialog(this, "Enter your five-digit zip code", true); textDialog.setVisible(true); zip = textDialog.data.trim(); FileOutputStream fileoutputstream = new FileOutputStream("zip.txt"); fileoutputstream.write(zip.getBytes()); } int character; URL url = new URL ("http://www.srh.noaa.gov/zipcity.php?inputstring=" + zip); URLConnection urlconnection = url.openConnection(); InputStream in = urlconnection.getInputStream(); String input = ""; String hiSearch; String loSearch; String inchar; char[] cc = new char[1]; while ((character = in.read()) != -1) { char z = (char)character; cc[0] = z; inchar = new String(cc); input += inchar; } in.close(); if(input.indexOf("Hi ") >= 0){ hiSearch = "Hi "; } else{ hiSearch= "Hi: "; } int currentPosition = 0; for(int loopIndex = 0; loopIndex < 4; loopIndex++){ int location = input.indexOf(hiSearch, currentPosition); int end = input.indexOf("°", location); hiTemperature[loopIndex] = input.substring(location + hiSearch.length(), end); currentPosition = end + 1; } if(input.indexOf("Lo ") >= 0){ loSearch = "Lo "; } else{ loSearch= "Lo: "; } currentPosition = 0; for(int loopIndex = 0; loopIndex < 4; loopIndex++){ int location = input.indexOf(loSearch, currentPosition); int end = input.indexOf("°", location); loTemperature[loopIndex] = input.substring(location + loSearch.length(), end); currentPosition = end + 1; } boolean evening = false; if(input.indexOf(loSearch) < input.indexOf(hiSearch)){ evening = true; hiTemperature[3] = hiTemperature[2]; hiTemperature[2] = hiTemperature[1]; hiTemperature[1] = hiTemperature[0]; } image = new BufferedImage(225, 201, BufferedImage.TYPE_INT_RGB); Graphics2D g = image.createGraphics(); g.setColor(Color.white); g.fillRect(0, 0, 224, 201); g.setColor(Color.gray); for(int loopIndex = 0; loopIndex < 21; loopIndex++){ g.drawLine(25, loopIndex * 10, 224, loopIndex * 10); g.drawLine(loopIndex * 10 + 25, 0, loopIndex * 10 + 25, 199); } g.setColor(Color.blue); Font font = new Font("Courier", Font.PLAIN, 18); g.setFont(font); for(int loopIndex = 20; loopIndex < 200; loopIndex += 20){ g.drawString(String.valueOf(100 - loopIndex / 2), 0, loopIndex + 5); } g.setColor(Color.red); if(!evening){ g.drawOval(65 - 4, 200 - (Integer.parseInt( hiTemperature[0]) * 2) - 4, 8, 8); } g.drawOval(105 - 4, 200 - (Integer.parseInt( hiTemperature[1]) * 2) - 4, 8, 8); g.drawOval(145 - 4, 200 - (Integer.parseInt( hiTemperature[2]) * 2) - 4, 8, 8); g.drawOval(185 - 4, 200 - (Integer.parseInt( hiTemperature[3]) * 2) - 4, 8, 8); if(!evening){ g.drawLine(65, 200 - (Integer.parseInt( hiTemperature[0]) * 2), 105, 200 - (Integer.parseInt(hiTemperature[1]) * 2)); } g.drawLine(105, 200 - (Integer.parseInt(hiTemperature[1]) * 2), 145, 200 - (Integer.parseInt(hiTemperature[2]) * 2)); g.drawLine(145, 200 - (Integer.parseInt(hiTemperature[2]) * 2), 185, 200 - (Integer.parseInt(hiTemperature[3]) * 2)); g.setColor(Color.blue); g.drawOval(65 - 4, 200 - (Integer.parseInt( loTemperature[0]) * 2) - 4, 8, 8); g.drawOval(105 - 4, 200 - (Integer.parseInt( loTemperature[1]) * 2) - 4, 8, 8); g.drawOval(145 - 4, 200 - (Integer.parseInt( loTemperature[2]) * 2) - 4, 8, 8); g.drawOval(185 - 4, 200 - (Integer.parseInt( loTemperature[3]) * 2) - 4, 8, 8); g.drawLine(65, 200 - (Integer.parseInt(loTemperature[0]) * 2), 105, 200 - (Integer.parseInt(loTemperature[1]) * 2)); g.drawLine(105, 200 - (Integer.parseInt(loTemperature[1]) * 2), 145, 200 - (Integer.parseInt(loTemperature[2]) * 2)); g.drawLine(145, 200 - (Integer.parseInt(loTemperature[2]) * 2), 185, 200 - (Integer.parseInt(loTemperature[3]) * 2)); g.setColor(Color.white); g.fillRect(55, 160, 140, 30); g.setColor(Color.blue); g.drawRect(55, 160, 140, 30); font = new Font("Courier", Font.PLAIN, 12); g.setFont(font); g.drawString("Four-Day Forecast", 65, 172); font = new Font("Courier", Font.PLAIN, 9); g.setFont(font); g.drawString("Source: Nat. Weather Srvce.", 58, 185); setTitle("The Forecaster"); setResizable(false); setSize(250, 240); setVisible(true); this.addWindowListener(new WindowAdapter(){ public void windowClosing( WindowEvent e){ System.exit(0); } } ); } catch (Exception e) { System.out.println(e.getMessage()); } } public void paint(Graphics g) { if(image != null){ g.drawImage(image, 10, 30, this); } } } class OkCancelDialog extends Dialog implements ActionListener { Button ok, cancel; TextField text; public String data; OkCancelDialog(Frame hostFrame, String title, boolean dModal) { super(hostFrame, title, dModal); setSize(280, 100); setLayout(new FlowLayout()); text = new TextField(30); add(text); ok = new Button("OK"); add(ok); ok.addActionListener((ActionListener)this); cancel = new Button("Cancel"); add(cancel); cancel.addActionListener(this); data = new String(""); } public void actionPerformed(ActionEvent event) { if(event.getSource() == ok){ data = text.getText(); } else { data = ""; } setVisible(false); } }
IN 1000kva transformer where the oil and winding temperature sensors is connected
1600kva capacity Transformers how the bucholz relay,Oil temperature,winding,surge relay relays setting are to be done
What is critical pressure ?. What will happen if water is heated above critical pressure and temperature?. What importance it is having related to Boiler?. Upto what presrure natural circulation is possible in Boilers?.
For the requirement of a furnace of temperature range up to 1200 oC using silicon carbide rods, What is the required rate of transformer needed (please do it with all details)?
What is the maximum cylinder head temperature of a 1200 KW, 12 cylinders DG set