A temperature sensor (RTD) connected via a temperature transmitter is adjusted to give an output of 4ma at 60 deg and 20 ma at 600 deg. This output (4-20ma) from the transmitter is connected to an IGBT-inverter to control a high speed (-12,000 to +12,000 RPM) DC motor. And in the inverter it is programmed as, for 4ma the motor speed will be -3,000 RPM and for 20ma the motor speed will be +10,000 RPM. The question is : If the motor speed is +5,500 (RPM), what will be the temperature? (-sign indicates that the motion is in reverse direction).
9 10087How to calibrate a temperature transmitter & how a Cold junction Compensation will be carried out?
2 8106what will be the maximum winding temperature of 6.6kv HT motor 450kw, Full load current 49A. 50Hz Frequency.
DVC,
3173Which material grade is better for low temperature application upto -20 deg C either IS 2062 GR B OR IS 2062 GR C ?
2283
How does Vbe and Ic change with temperature?
what are the microbes that grow if proper temperatures are not maintained during fermentation process?
At what temperature should fresh sweet potato leaves be stored and dried?
How the plants can survive in Tundra where temperature reaches -57oC?
I currently use 17-7 PH stainless which is hardened to condition CH after forming. raw matl is .1.75"X .12" X .008". Its main usage after hardening is silicon wafer retainer where it's contantly cycled up and down to putin and remove wafer after 40-60 sec process at 400C temp. At this high temperature this part seemed to deform after a a couple of hundred wafer which is what it was designed for in the first place. THere is a proposal to go to a different material to increase lifeline of this part. My question is..... can 321 SST be a plugin replacement. I know this has a higher temp rating but how about its forming characteristics, will it have spring properties, and wont become brittle after prolonged exposure to 400C.
Design a program which assigns values to the array temperature. The program should then display the array with appropriate column and row headings.
An ice-box is built of wood 1.75 cm thick, lined with cork 3 cm thick. If in the steady state the temperature of the inner surface of the cork is 0 ºC and that of the outer surface of wood is 12 ºC, what is the temperature of the wood-cork interface? The thermal conductivities of wood and cork are 0.2 W/m-K and 0.04 W/m-K respectively
What is the temperature PROFILE OF A FLUID W. R. T. Distance from a sphere to which it is IN CONTACT which is at constant temp.?
In which working principal temperature transmitter work.explain in detailed.
hii..i am doin a project called Forecaster..wat it does is it asks user to enter a zip code..then it establishes urlconnection with a weather website n fetches data n data is converted into graphical representation..but it doesnt show any output..i am not able it figure out the reason..can u plzzzz help me out..i am givin u code import java.io.*; import java.awt.*; import java.net.*; import java.awt.image.*; import java.awt.event.*; public class Forecast extends Frame { OkCancelDialog textDialog; BufferedImage image = null; public static void main(String[] args) { new Forecast(); } public Forecast() { String zip =""; File zipFile = new File("zip.txt"); String hiTemperature[] = new String[4]; String loTemperature[] = new String[4]; try { if(zipFile.exists()){ FileReader filereader = new FileReader("zip.txt"); BufferedReader bufferedreader = new BufferedReader(filereader); zip = bufferedreader.readLine(); } else { textDialog = new OkCancelDialog(this, "Enter your five-digit zip code", true); textDialog.setVisible(true); zip = textDialog.data.trim(); FileOutputStream fileoutputstream = new FileOutputStream("zip.txt"); fileoutputstream.write(zip.getBytes()); } int character; URL url = new URL ("http://www.srh.noaa.gov/zipcity.php?inputstring=" + zip); URLConnection urlconnection = url.openConnection(); InputStream in = urlconnection.getInputStream(); String input = ""; String hiSearch; String loSearch; String inchar; char[] cc = new char[1]; while ((character = in.read()) != -1) { char z = (char)character; cc[0] = z; inchar = new String(cc); input += inchar; } in.close(); if(input.indexOf("Hi ") >= 0){ hiSearch = "Hi "; } else{ hiSearch= "Hi: "; } int currentPosition = 0; for(int loopIndex = 0; loopIndex < 4; loopIndex++){ int location = input.indexOf(hiSearch, currentPosition); int end = input.indexOf("°", location); hiTemperature[loopIndex] = input.substring(location + hiSearch.length(), end); currentPosition = end + 1; } if(input.indexOf("Lo ") >= 0){ loSearch = "Lo "; } else{ loSearch= "Lo: "; } currentPosition = 0; for(int loopIndex = 0; loopIndex < 4; loopIndex++){ int location = input.indexOf(loSearch, currentPosition); int end = input.indexOf("°", location); loTemperature[loopIndex] = input.substring(location + loSearch.length(), end); currentPosition = end + 1; } boolean evening = false; if(input.indexOf(loSearch) < input.indexOf(hiSearch)){ evening = true; hiTemperature[3] = hiTemperature[2]; hiTemperature[2] = hiTemperature[1]; hiTemperature[1] = hiTemperature[0]; } image = new BufferedImage(225, 201, BufferedImage.TYPE_INT_RGB); Graphics2D g = image.createGraphics(); g.setColor(Color.white); g.fillRect(0, 0, 224, 201); g.setColor(Color.gray); for(int loopIndex = 0; loopIndex < 21; loopIndex++){ g.drawLine(25, loopIndex * 10, 224, loopIndex * 10); g.drawLine(loopIndex * 10 + 25, 0, loopIndex * 10 + 25, 199); } g.setColor(Color.blue); Font font = new Font("Courier", Font.PLAIN, 18); g.setFont(font); for(int loopIndex = 20; loopIndex < 200; loopIndex += 20){ g.drawString(String.valueOf(100 - loopIndex / 2), 0, loopIndex + 5); } g.setColor(Color.red); if(!evening){ g.drawOval(65 - 4, 200 - (Integer.parseInt( hiTemperature[0]) * 2) - 4, 8, 8); } g.drawOval(105 - 4, 200 - (Integer.parseInt( hiTemperature[1]) * 2) - 4, 8, 8); g.drawOval(145 - 4, 200 - (Integer.parseInt( hiTemperature[2]) * 2) - 4, 8, 8); g.drawOval(185 - 4, 200 - (Integer.parseInt( hiTemperature[3]) * 2) - 4, 8, 8); if(!evening){ g.drawLine(65, 200 - (Integer.parseInt( hiTemperature[0]) * 2), 105, 200 - (Integer.parseInt(hiTemperature[1]) * 2)); } g.drawLine(105, 200 - (Integer.parseInt(hiTemperature[1]) * 2), 145, 200 - (Integer.parseInt(hiTemperature[2]) * 2)); g.drawLine(145, 200 - (Integer.parseInt(hiTemperature[2]) * 2), 185, 200 - (Integer.parseInt(hiTemperature[3]) * 2)); g.setColor(Color.blue); g.drawOval(65 - 4, 200 - (Integer.parseInt( loTemperature[0]) * 2) - 4, 8, 8); g.drawOval(105 - 4, 200 - (Integer.parseInt( loTemperature[1]) * 2) - 4, 8, 8); g.drawOval(145 - 4, 200 - (Integer.parseInt( loTemperature[2]) * 2) - 4, 8, 8); g.drawOval(185 - 4, 200 - (Integer.parseInt( loTemperature[3]) * 2) - 4, 8, 8); g.drawLine(65, 200 - (Integer.parseInt(loTemperature[0]) * 2), 105, 200 - (Integer.parseInt(loTemperature[1]) * 2)); g.drawLine(105, 200 - (Integer.parseInt(loTemperature[1]) * 2), 145, 200 - (Integer.parseInt(loTemperature[2]) * 2)); g.drawLine(145, 200 - (Integer.parseInt(loTemperature[2]) * 2), 185, 200 - (Integer.parseInt(loTemperature[3]) * 2)); g.setColor(Color.white); g.fillRect(55, 160, 140, 30); g.setColor(Color.blue); g.drawRect(55, 160, 140, 30); font = new Font("Courier", Font.PLAIN, 12); g.setFont(font); g.drawString("Four-Day Forecast", 65, 172); font = new Font("Courier", Font.PLAIN, 9); g.setFont(font); g.drawString("Source: Nat. Weather Srvce.", 58, 185); setTitle("The Forecaster"); setResizable(false); setSize(250, 240); setVisible(true); this.addWindowListener(new WindowAdapter(){ public void windowClosing( WindowEvent e){ System.exit(0); } } ); } catch (Exception e) { System.out.println(e.getMessage()); } } public void paint(Graphics g) { if(image != null){ g.drawImage(image, 10, 30, this); } } } class OkCancelDialog extends Dialog implements ActionListener { Button ok, cancel; TextField text; public String data; OkCancelDialog(Frame hostFrame, String title, boolean dModal) { super(hostFrame, title, dModal); setSize(280, 100); setLayout(new FlowLayout()); text = new TextField(30); add(text); ok = new Button("OK"); add(ok); ok.addActionListener((ActionListener)this); cancel = new Button("Cancel"); add(cancel); cancel.addActionListener(this); data = new String(""); } public void actionPerformed(ActionEvent event) { if(event.getSource() == ok){ data = text.getText(); } else { data = ""; } setVisible(false); } }
IN 1000kva transformer where the oil and winding temperature sensors is connected
1600kva capacity Transformers how the bucholz relay,Oil temperature,winding,surge relay relays setting are to be done
What is critical pressure ?. What will happen if water is heated above critical pressure and temperature?. What importance it is having related to Boiler?. Upto what presrure natural circulation is possible in Boilers?.
For the requirement of a furnace of temperature range up to 1200 oC using silicon carbide rods, What is the required rate of transformer needed (please do it with all details)?
What is the maximum cylinder head temperature of a 1200 KW, 12 cylinders DG set