Interested to Buy Any Domain ? << Click Here >> for more details...
Please can anybody tell me some good ideas to write test
case for fan and test case for chair?
- 6 Answers
- 20341 Views
- TCS, I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / deepak singh
FAN:
1. The minimum number of blades should be three.
2. The blades length should be of proper length so that it
should provide air to almost every part of the room.
3. The direction of rotation of the blade should be proper.
4. The fan should run with minimum noise.
5. When applied electricity, it should start running
gradually increasing its speed and vice-versa when elctric
supply is cut.
6. The blades should have proper distance from the ceiling.
7. The fan while in motion, should not vibrate.
| Is This Answer Correct ? | 11 Yes | 1 No |
Answer / umesh7a
1.It should have a hook for hanging in the roof.
2. it should have minium three blades.
3. If should be moving once the electricty pass into it.
4. Speed of the fan should be controlled by the regulator.
5.It should be stop once the electric switch off.
6. The color of the fan should be dark.
These are the test cases can be written for the fan . If
anybody can give the correct answer then please give.
Umesh Sharma
09818109782
| Is This Answer Correct ? | 2 Yes | 1 No |
Answer / umesh7a
Chair
It should be four legs.
It should be folded and open Smoothly if it is folding
chair.
It should be comfortable While sitting.
it should be should painted from all the parts.
All the screws should be well tighted.
it should have the rubber pads on its lesg.
| Is This Answer Correct ? | 2 Yes | 1 No |
Answer / nadeem usmani
1 check the number of blades
2 check the functionality of regulator or buttons
3 check when apply power then its blades should move in
clockwise direction
4 check the functionality of knob button
5 check the color,body,logo,of fan
6 while running it should move with minimum noise
| Is This Answer Correct ? | 1 Yes | 0 No |
Answer / parimla
For CHAIR:
Check for required look -> two legs, two hands, seat etc..
Check the fixtures
Load testing -> how many lbs. can it hold
Stress testing -> testing beyond its normaloperation:
rocking, sitting reverse etc..
Acceptance testing -> test if it satisfies the user's
requirement of sitting in the chair with basic comfort level
| Is This Answer Correct ? | 2 Yes | 3 No |
What is test environment? Elaborate with example.
Do you write test plan and test case?
ATM REQUIREMENT TO BE TRANSLATED INTO TEST PLAN AND TEST CASES ATM REQUIREMENT AS FOLLOWS: Requirements Statement for Example ATM System The software to be designed will control a simulated automated teller machine (ATM) having a magnetic stripe reader for reading an ATM card, a customer console (keyboard and display) for interaction with the customer, a slot for depositing envelopes, a dispenser for cash (in multiples of $20), a printer for printing customer receipts, and a key-operated switch to allow an operator to start or stop the machine. The ATM will communicate with the bank's computer over an appropriate communication link. (The software on the latter is not part of the requirements for this problem.) The ATM will service one customer at a time. A customer will be required to insert an ATM card and enter a personal identification number (PIN) - both of which will be sent to the bank for validation as part of each transaction. The customer will then be able to perform one or more transactions. The card will be retained in the machine until the customer indicates that he/she desires no further transactions, at which point it will be returned - except as noted below. The ATM must be able to provide the following services to the customer: A customer must be able to make a cash withdrawal from any suitable account linked to the card, in multiples of $20.00. Approval must be obtained from the bank before cash is dispensed. A customer must be able to make a deposit to any account linked to the card, consisting of cash and/or checks in an envelope. The customer will enter the amount of the deposit into the ATM, subject to manual verification when the envelope is removed from the machine by an operator. Approval must be obtained from the bank before physically accepting the envelope. A customer must be able to make a transfer of money between any two accounts linked to the card. A customer must be able to make a balance inquiry of any account linked to the card. A customer must be able to abort a transaction in progress by pressing the Cancel key instead of responding to a request from the machine. The ATM will communicate each transaction to the bank and obtain verification that it was allowed by the bank. Ordinarily, a transaction will be considered complete by the bank once it has been approved. In the case of a deposit, a second message will be sent to the bank indicating that the customer has deposited the envelope. (If the customer fails to deposit the envelope within the timeout period, or presses cancel instead, no second message will be sent to the bank and the deposit will not be credited to the customer.) If the bank determines that the customer's PIN is invalid, the customer will be required to re-enter the PIN before a transaction can proceed. If the customer is unable to successfully enter the PIN after three tries, the card will be permanently retained by the machine, and the customer will have to contact the bank to get it back. If a transaction fails for any reason other than an invalid PIN, the ATM will display an explanation of the problem, and will then ask the customer whether he/she wants to do another transaction. The ATM will provide the customer with a printed receipt for each successful transaction, showing the date, time, machine location, type of transaction, account(s), amount, and ending and available balance(s) of the affected account ("to" account for transfers). The ATM will have a key-operated switch that will allow an operator to start and stop the servicing of customers. After turning the switch to the "on" position, the operator will be required to verify and enter the total cash on hand. The machine can only be turned off when it is not servicing a customer. When the switch is moved to the "off" position, the machine will shut down, so that the operator may remove deposit envelopes and reload the machine with cash, blank receipts, etc. The ATM will also maintain an internal log of transactions to facilitate resolving ambiguities arising from a hardware failure in the middle of a transaction. Entries will be made in the log when the ATM is started up and shut down, for each message sent to the Bank (along with the response back, if one is expected), for the dispensing of cash, and for the receiving of an envelope. Log entries may contain card numbers and dollar amounts, but for security will never contain a PIN.
plz explain vss?
explain with examples- transaction testing, syntax testing, domain testing, logic testing, and state testing.
how can write testcase for admin role? can u tel me detail
write down test cases for "x>=1"
Can anybody help me in writing test cases for a scenario? need help at the earliest. will send you the requirement doc to your email id. thanks raj
Pls can any 1 temme the test cases for an online banking proj. like account transaction summary, deposit module, savings module
i am preparing for interviews in real time job what test cases we have to prepare please explain with example?
In an online shopping application there are 3 text boxes.One of Login,Add to the shopping cart and Purchase goods.Which & How many test cases can be written for these 3 text boxes?
how to write test cases for "Browse" button.
Automation Testing 
