main() { char input[] = "SSSWILTECH111"; int i, c; for ( i=2; (c=i

main()
{
char input[] = "SSSWILTECH111";
int i, c;
for ( i=2; (c=input[i])!=''; i++) {
switch(c) {
case 'a': putchar ('i'); continue;
case '1': break;
case 1: while (( c = input[++i]) != '1' && c!= '');
case 'E': case 'L': continue;
default: putchar(c);continue;
}
putchar(' ');
}
putchar('
');
}

Question Posted / guest

1 Answers
3666 Views
Vector, I also Faced
E-Mail Answers

main() { char input[] = "SSSWILTECH111"; int i, c; for ( i=2; (c=input[i])!='�..

Answer / chandrasekhar

SWITCH

Is This Answer Correct ?

5 Yes

0 No

Post New Answer

More Engineering Interview Questions

In an existing power plant (phase I) with step up transformers (3nos) with Ynd1 vector group to the 400KV bus bar,an extension power plant (phase II) with transformers (4nos) with Ynd11 vector group >. what are the consequences of such configuration ,please note that % impedance are also differ i.e. 15% & 10.5% the reason was that auxiliary supply interface is at different voltage levels i.e 400v & 6.6KV in phase i and phase II respectively .please advise ! Thank you !

1 Answers

why water first pass to sac then sba

1 Answers ACC,

What is the full form of cable type-ayry

0 Answers TATA,

What's is the mechanism of for stroke engine

0 Answers Medha Servo,

What is sub category?

1 Answers DBS,

alternator make voltage 120 degree. as we change degree ex. 100 and 160 or other degree then voltage make. yes or no and why

0 Answers

explain ht breaker in a detailed way??

1 Answers Reliance,

What is smoke testing and sanity testing in software testing

0 Answers Fresher,

difference between gauges and comparator

0 Answers

Basic questions asked in HPCL(instrumentation) in refinery section

1 Answers HPCL,

what should be the recommended BDV of an oil transformer???

0 Answers

Question 95 - The following formula is used as a reference : (analyte signal) / (internal standard signal) = (f-factor) x (concentration of analyte) / (concentration of internal standard). A solution containing 3 mM of analyte and 4 mM of internal standard gave peak signals of 2 and 3 mamps respectively. Another similar solution containing 2 mM of analyte and 1 mM of internal standard gave peak signals of 1 and 4 mamps respectively. Find the average f-factor.

1 Answers

For more Engineering Interview Questions Click Here