what is rt and rrt? how we find rrt? relation between rt and rrt/
- 1 Answers
- 17175 Views
- Cadila, I also Faced
- E-Mail Answers
Answer / harshad raj
In HPLC & GC :
The RT means, in which time the main principle peak of component is retain in minute called RT as retention time. and the RRT means: in which time the impurity peaks are retained before and after the main principle peak and that retention time of impurity peaks called RRT, ie. relative retention time RRT to the base of main peak RT.
The relation between RT & RRT is always the main peak RRT is 1.0 and the impurity peak RRT calculation is IMPURITY PEAK RT / MAIN PEAK RT.
For example: The main peak RT is 15 MIn, and the Impurity RT is 5 Min,
The RRT of Main Peak is 15/15 = 1
The RRT of Impurity peak is 5/15 = 0.333...
| Is This Answer Correct ? | 32 Yes | 3 No |
Why caffeine as a reference standard used for calibration of HPLC?
11 Answers Gangwal Chemicals, Orchid,
In the test for control of absorbance in UV calibration why do we use only potassium dichromate and what is purpose of taking a specified amount of 57.0-63.0mg?
We use Potassium Dichromate solution for the calibration of UV-Visible Spectrophotometer in UV region. My question is to calibrate visible region which solution could be used in photometric accuracy
1 why polyesterene film used for ftir calibration ? 2 why k2cr2o7 is used for control of abs in uv ? 3 why holmium oxide used for control of wavelength in uv
what is the difference between polarimeter lamp and ir lamp
what is the principle involved in turbidometry and nephelometry ?
0 Answers Graviti Pharmaceuticals,
Hello Dear all; I have a technical question related to analytical Chemistry, I have a sample of (40% w/w) Ferric Chloride solution (for water treatment purposes which consist a little portions of Ferrous Chloride and Hydrochloric acid. I need to know the methods to determine the percentages of each Ferrous Chloride and Chloride acid. Also I want to make sure that this solution is truly (40% w/w). So ANY CLUE !!! Thanks in advance.
What is delay volume?
give me method of calculating co relation of coefficient for HPLC,SOR & ANY OTHER
what is the criteria for choosing capillary column in GC??is it dependent on sample load?
a bottle of concerntrated HCL (36.5) was labelled as 37% (w/w) and density 1.19m/l.What is hcl molarity?
if partition coefficient value was positive means, what it indicates ?
Organic Chemistry 
