how to distinguish between ac motor and dc motor without seeing name plate of it.only seeing its getup look
3 9252when u are given a timer,push buttons and contactor, how do i practically make a star delta control circuit and a direct online control circuit?
1 1975why are we adopting 132kv,220kv for transmission rather than using 440kv at all transmission lines as it gives lower losses?
2 5853what is the difference b/w KVA and KW? the transformer are mentioned KVA rating and the loads are mentioned KW.why?
2 2622ii) A shunt motor supplied at 230V, runs at 900 rpm when the current is 30A. The resistance of the armature is 0.4 ohms. Calculate the resistance required in series with the armature to reduce the speed to 600 rpm, assuming that the armature current is then 20A. [12]
1855iii) A shunt motor runs at 70 rad/sec from a 460V supply and takes in an armature current of 100A. Resistors of 2.52 ohms and 1.64 ohms are connected in series with the armature and in parallel with the armature respectively. The field excitation remains direct from the 460V supply but the generated torque is halved. Determine the new running speed. Neglect brush voltage drop. The armature resistance is 0.4 ohms. [15]
1 1959Post New Electrical Engineering Questions
How to calculate the fuel consumption for 600kva DG genset which connecting with 25%load?
what is the minimum recommended leakage current of an earthed cable connected to the body or skid of an alternator
If there is major % of Voltage harmonics in the system, how can it be control or reduced?
from where the self excitrd induction generator get the power?why is the voltage regulation is poor of seig?
WHAT ARE THE DATAS REQUIRED FOR PROTECTION AND METERING AND CONTROL AND LOGIC PREPARATION,HOW TO STUDY THE PROTECTION AND METERING?
For an induction motor wat is the loading/unloading cycle duration or interms of L/UL ratio/ percentage?
what is transient stability analysis means?
im electrical engineer, could any one help me for FEWA exam questions please ?
how balanced in star delta connection ?
what is meant by directional earth fault and non directional earth fault? describe both.
In siemens PLC, why do we want to move the data ?
write a program that prints prime numbers from 1-20 in digonal form
What is the working mechanism of OLTC in Power Transformers????
why the name trunking bus PT
what is draiv work