Interested to Buy Any Domain ? << Click Here >> for more details...
plz tall me that any pharmacopeia and guideline is par meted
to use 1.68,4.01,7.00,9.00,12.45 buffer for ph meter
calibration
- 2 Answers
- 4970 Views
- Torrent Pharma, I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
We have to cover all regions like Acidic ,Basic and Nutrel medium in pH thatsy we use 1.68,4.01,7.00 ,9.0012.45 for 5 point calibration and there is another method for pH calibration that is 3 point calibration in this we use 4.00,7.00and9.20 buffers overall concept is to cover all regions in pH calibration
| Is This Answer Correct ? | 3 Yes | 0 No |
Answer / parsuram drl
Acid to base limit is 1 to 14 if cover 1,4,7,10,12 that also correct for ph calibration
| Is This Answer Correct ? | 0 Yes | 0 No |
Why we inject a standard 6 times for Related substances by HPLC and 5 times for Assay?
What is difference b/w IR&NIR
what is the moisture content of Disodium hydrogen tartrate. how it can be calculted. as 16.5%
in karl fischer reagent which solvent is used for dissolving iodine sulphur dioxide and imidazole
How we can determine OOT limit in Stability
why are not used methonol in kf titrator to find out water content in ketones?
Describe your experience with quality assurance and quality control analyses?
11 Answers Aurobindo, Dr Reddys, MSC, Reddy Labs,
My question about gas chromatography sulfur chemiluminsecence detector. I test unknown sample gas by GC-SCD (calibrated ) and the result of *H2S is 279 PPM , *but when I test the same sample with the GC-TCD (calibrated ) the value of *H2S is 2500 PPM . I'd like to inform you that both GCs are calibrated and have very good operation conditions with stable parameters . the question is if the sample gas with higher H2S over detection limits of SCD detector (1000 ppm). why the result it 279 ppm Best regards
if your product is soluble in 0.1n hcl and water then which you choose as media from these 2 media?
what is the disso medium for tropsiun chloride
In Agilent HPLC calibration using Empower 3 Software, What is the criteria for GPV Baseline starting point? i.e., Either it can start from -0.00/+0.00 or any range is there like -0.05 to +0.05 or ......etc?
I want analyze my compound at 325 nm so which standard shall i use to calibrate my HPLC system? How i can assure my hplc detector is suitable or not?
Organic Chemistry 
