Answer / jitenedra kuamr sinha

so from above discussion what we observed that ps stand for

POWER OVER ETHERNET
AND TS IS NOT SOO

SO MAIN DIFFERENCE BETWEEN PS AND TS IS THAT PS IS POE(POWER
OVER ETHERNET)AND TS IS NON POE

THANKS
JITENDERA KUAMR SINHA

Answer / jitendera sinha

Cisco Catalyst Switch, 24 x 10/100TX RJ45, 2 x SFP Slots, IP
Base Licence (upgradeable), Managed Layer 2/3+

The Cisco Catalyst 3560 Series isa new line of fixed
configuration, enterprise-class, IEEE 802.3af and Cisco
prestandard Power over Ethernet (PoE) switches in Fast
Ethernet configurations. The Catalyst 3560 is an ideal
access layer switch for small enterprise wiring closets or
branch office environments that are using their LAN
infrastructure for the deployment of new products and
applications such as IP telephones, wireless access points,
video surveillance, building management systems, and remote
video kiosks. Embedded in the Catalyst 3560 is the Cisco
Cluster Management Suite (CMS) Software, which allows users
to simultaneously configure and troubleshoot multiple Cisco
Catalyst desktop switches using a standard Web browser.
Key Features & Benefits:
24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
1RU fixed-configuration, multilayer switch
Enterprise-class intelligent services delivered to the
network edge
IP Base license (formerly SMI) installed
Basic RIP and static routing, upgradeable to full dynamic IP
routing




Cisco 3560 Series 24 Port PoE Switch, WS-C3560-24PS-S

The Cisco Catalyst 3560 Series switches is a line of fixed
configuration, enterprise-class, IEEE 802.3af and Cisco
prestandard Power over Ethernet (PoE) switches in Fast
Ethernet configurations that provide availability, security,
and quality of service to enhance network operations.
Embedded in the Catalyst 3560 is the Cisco Cluster
Management Suite (CMS) Software, which allows users to
configure and troubleshoot multiple Cisco Catalyst desktop
switches using a standard Web browser. Cisco CMS Software
provides configuration wizards that greatly simplify the
implementation of converged networks and intelligent network
services.

* Ports qty- 24 x Ethernet 10Base-T, Ethernet 100Base-TX
* Data transfer rate- 100 Mbps
* Data link protocol- Ethernet, Fast Ethernet
* Remote management protocol- SNMP 1, RMON 1, RMON 2,
Telnet, SNMP 3, SNMP 2c
* Connectivity technology- Wired
* Communication mode- Half-duplex, full-duplex
* Status indicators- Port status, port transmission
speed, port duplex mode, system
* Expansion slots total (free)- 2 x SFP (mini-GBIC)
* Interfaces-
o 24 x 10/100 Ethernet - RJ-45
o 1 x console - RJ-45
o Power over Ethernet (PoE)


this detyail is copy and pasted with my switches (comnay) i
suppose that it will help u

what is route aggregation

2 Answers  

---

Define the virtual path?

0 Answers  

---

Identify the keystroke used to terminate the setup mode? A.) Ctrl-K B.) Crtl-C C.) Ctrl-Z D.) Crtl-End

1 Answers   Cisco, HCL,

---

Difference between Distance vector, Link state protocols

3 Answers   HCL,

---

When ospf protocol advertise its routing table?

0 Answers  

---

What do we check while configuring the server?

0 Answers  

---

Which commands should you use to enable IGRP routing? A. router igrp 100 Network 192.168.1.0 Network 10.0.0.0 B. router igrp 100 Network 192.168.2.0 Network 10.0.0.0 C. router igrp 100 Network 192.168.1.0 192 168.1.1 Network 10.2.0.0 10.2.1.1 D. router igrp 100 Network 192.168.1.0 255.255.255.0 Network 10.2.0.0 255.255.255.0

3 Answers  

---

Can you define LAC

0 Answers   CCIE,

---

What is GRE in PPTP?

0 Answers   CCIE,

---

Which layer is responsible for coordinating communication between systems? A.) Application B.) Network C.) Session D.) Transport E.) Physical F.) Data Link

2 Answers   HCL,

---

How does PPP use LCP for link control?

0 Answers   CCIE,

---

What is the size of ipv6?

0 Answers  

---