Answer / anitha bharathan

Test case for table:
1)Check the metal of the table ie.,wood or iron or plastic..
2)Check the shape of the table
3)Check how many legs the table has
4)Verify the colour of the table

Test case for a pen:
1)Check whether it is Ink or ball point
2)Verify the colour of the ink
3)Verify the appearence of the pen tip
4)verify the size,shape,colour of the pen
5)Verify the functionality of the pen i.e whether the flow
of the ink is proper or not.
6)Verify whether the pen tip is covered by a suitable cap
or not

Test case for an electric bulb:
1)Verify whether the electric bulb is connected properly to
the Switch
2)Verify the size and appearence of the bulb and colour of
the light exhibit from the bulb
3)Verify the functionality of the bulb i.e.Whether it is
working when the switch is on and stop working when the
switch is off


Test case for an electric bulb

Answer / ravi

Test cases for PEN

> Integration test Cases

1) Check all modules like cap,top,refill,body are integrated properly in case of ball point pen.
2) Check 3rd party cap can fit to this pen
3) Check 3rd party refill,body and top is used for this pen

> Functionality Test Cases

1)Check for grip of the pen ( Usalibility tc's)
2) Check whether pen works fine even though it was put in water for some time( Usalibility tc's)
3) check pen works for different temperatures ( Usalibility tc's)
4.Pen’s ink should be dark so that normal human eyes can read clearly
5.Pen should be continuously in writing mode
6.Pen’s ink color and the pen’s body, cap color should be same so that easy to understand the requirement for user
7.Pen should have the soft grip at the middle place for usability( Usalibility tc's)
8.Pen should be in continuously writing mode under hottest and coolest temperature( Usalibility tc's)
9.If pen drops from the several feet then also it should be in continuously writing mode if ink is available in pen
10.Pen should not have “Use and throw” type
11.Pen’s refill should be replaceable
12.Paper should be straight and clean
13.Paper should not too smooth and too hard
14.put pressure on the nib (load testing Tcs)

> Compatabilty Test cases

1) check pen fits best in pocket or compass box
2) check pen is compatible to write on cloth,cardboard etc other than paper

> Requirement Test cases

1) Check for logo of company
2) Check for Name of company
3) Pen length as per requirement

> - Ve Test cases

1.rub the pen ball on a stone and then write
2.soak the refill upward and then write on a paper
3.bend the refill at multiple end and then try to write
with it
4.dip the pen in water and then write. do this for each
letter to be written
5.remove the nib of the pen and after draining out all the
ink from the nib and then put it back to its place and try
to write on a paper
6. try to write on leaves

Answer / sweta

table:
GUI Test:
1.check the availability of legs.
2.check the colour.
3.check the metal of the table.(ex:wood,glass,iron etc)
4.check whether round or square in shape.

pen:
GUI test:
1.check the length of the pen.
2.check the colour of the pen as per requirement.
3.check whether the pen is ink or ball point pen.
4.check whether cap is available or not.
5.check whether the pen is made of metal or plastic.
Functinality test:
1.write it on a paper.
expected value:pen must write on paper.
actual value:pen is writing on paper.
2.put pressure on the nib.
expected value:it should not break.
actual value:it is not broken.
3.put the cap back to the pen.
expected value:the pen should fit to the cap.
actual value:it is fit to the cap

electric bulb:
GUI Test:
1.check the size of the bulb.
2.check for the shape of the bulb.
3.check the watt of the bulb.
4.check whether the bulb is connected to the holder or not.
Functionality test:
1.switch on the bulb.
expected value:bulb must be glow.
actual value:bulb is glowing.
2.switch off the bulb.
expected value:bulb should not glow.
actual value:bulb is not glowing.

Answer / rakesh

Test case for table:
1)Check the metal of the table ie.,wood or iron or plastic..
2)Check the shape of the table
3)Check how many legs the table has
4)Verify the colour of the table

Test case for a pen:
1)Check whether it is Ink or ball point
2)Verify the colour of the ink
3)Verify the appearence of the pen tip
4)verify the size,shape,colour of the pen
5)Verify the functionality of the pen i.e whether the flow
of the ink is proper or not.
6)Verify whether the pen tip is covered by a suitable cap
or not

Test case for an electric bulb:
1)Verify whether the electric bulb is connected properly to
the Switch
2)Verify the size and appearence of the bulb and colour of
the light exhibit from the bulb
3)Verify the functionality of the bulb i.e.Whether it is
working when the switch is on and stop working when the
switch is off

Answer / swati singh

what are test case of pen, bottel,lift with table format objective,pre-requiste,step,data,expected data,atual result,status pass/fail

Answer / poonam

Usability test cases:
Table
1. is the table stable or unstable to work on
2. is the surface smooth
3. is it reachable in sitting position

Pen:

1. are you comfortable in writing with this pen
2. how long you can write without any pain in hands

Electric bulb:

1. how brightness it is
2. how safe it is

Sample test cases for data conversion(Utility billing system)

0 Answers  

What is the syntax testing?

0 Answers  

What are the processes / steps invovled in Defect Prevention meeting?

1 Answers  

what are those parameters or matrixes for tesing a software user interface?

2 Answers  

Write Test cases for the below scenario? scenario 1: Replace the current CSS software with TML software. Scenario 2: Provide the same reports for business as currently provided by CSS software. Not: CSS and TML are customized software.

0 Answers   Microsoft,

Explain the component testing?

0 Answers  

how to write test case for Add, Delete,Update,search and Edit button. Please its urgent.Could anybody help me as soon as possible

2 Answers  

suppose an interviewer asks you to write a testcase for a login window (and application is not given to test). Should we write actual results or expected results or both?

3 Answers  

Given the following code, which is true about the minimum number of test cases required for full statement and branch coverage: Read P Read Q IF P+Q > 100 THEN Print “Large” ENDIF If P > 50 THEN Print “P Large” ENDIF how to find statement and branch coverage? Explain in brief?

0 Answers   ISTQB,

Circle any inconsistencies in the following text: User Story 3005 - Dave wishes to talk to Fred using a radio. Business Requirements: 1. Dave needs the ability to put a line into select. 2. Dave receives a visual color and text indication that the line is selected (picked up). a. Default indication will be that the pad turns red and the text ‘Select’ appears as the 3rd line of text. 3. David hears audio from a selected line in his defined audio path. 4. Dave uses Push-To-Talk to talk to Fred. 5. Dave receives a visual color and text indication that the line has been de-selected (hung up). • The default inactive state is a white pad with no text on the 2nd line. 6. Multiple Freds can select the same radio. 8. If a radio is selected while another radio is already selected, then the first phone is automatically deselected.

0 Answers  

Could someone answer the following testing Questions? 1)Give 5 reasons why a build can be released with bug 2)Write a bug report for a word processor program which crashes when the contents of 89th column is been sorted in assending order. 3)write test 10 cases for program which has a table with 2 fields of NAME od char type and CLASS of INT type.NAME fields is truncated after 26 charaters and CLASS takes value between 1 to 9 both included. There are 3 possible opearations program can perform a)When a new student joins the class the program adds a new field b)When student leaves the class the field get deleted c)when student gets promoted then program incremts the class by 1 Write 5 test cases for the scenario. 4)write 10 test cases for a program that takes date in dd/mm/yyyy format and prints it out with a increment of 1. for dates (dd) can be given in the range 1<=dd>=30 for months (mm) can be given in the range 1<=mm>=12 for years(yyyy) can be given in the range 1600<=yyyy>=9999 5)Give 5 bugs that could cause a program to crash when it printed the 999999 th pages 1000001th line.

6 Answers   Adobe, Android,

write down test cases for "x>=1"

6 Answers   Quexst,