Answer / suresh palanivel

Advantage:

Hub is less expensive product.

Diadvantages:

It will broadcast to all the ports
It runs half duplex
If 10 Ports in a hub it will share bandwidth of 100 MbPs.
So each port share 10 Mbps

Answer / guest

advantage
1.it is used for connect the multiple devices.
2.

Answer / rakesh kumar agrawal`

a)Hub is broadcast all the ports.Data is going to all the
computer one by one that the reasons of slow speed over the
network.
b)bandwidth is shared by all of the PC's connected to the
hub

Answer / syed mahboob feroz ahmed

Hi,
The Advantage and disadvantage of Hub is as follows:
1)A hub is used to internal connectivity between systems.
(Advantage)
2)A hub has minimum 4 ports and cannot accomodate for big
Networks (Disadvantage)
3)A console port is not available in Hub and so the Band
width provided by ISP is divided unequally among network
and could gain slow access to Internet.(DisAdvantage)

Answer / rixongile

a hub can be able to support multiple users at the same time

Answer / amjadkhan

A huge difference is here between hub and switch

A Hub is old device and it is non intelligent device
which can send the packets from one system to all other
system , and other system gets the copied of that packets
Because it doesn't read the Mac Address
so there fore it is called non intelligent device

But Switch is new Technology
It can read the Mac Address
First It broadcast
But after that it unicast
when we send the packets it goes through to the ports
Thanks (Amjad khan Ahmadzai)
if u face any problem u can send in this email
Amjad_ahmadzai@yahoo.com
Amjad_ahmadzai@hotmail.com

Answer / kailas shingne

If increase no of computer the probability of computer
accruing a mediums has increase.

Answer / abbas khan

hubs are hardware devices that can have a no. of devices or computers connected to them. They are often used to connect togethera no. of devices to form a LAN - for eg: a star network .

Answer / alleni venkatesh

1.Hub is an not intaligent device.
2. It works with bits.
3.use broadcast for communication.
4.bandwidth is shared.
5. One way communication.
6.its means half duplex either send or receive.

Answer / ticx

PROS
IT IS CHEAP
CONS
LESS INTELIGENT THAN OTHER DEVICES LIKE A SWITCH.

1. What is LAN segmentation? Why it is used? What are the different techniques to create LAN segments?

0 Answers  

how many host we can add for network 172.112.0.1/20 ? and which is the broadcast address for above network ?

6 Answers   KPIT,

NFS server + Solaris client + Linux client, all connected at GigE to the same switch. The Linux client is fast but the Solaris client is slow. Explain troubleshooting steps

1 Answers   ABC,

what is the troublshooting the network

17 Answers   DELL,

why we need MAC address in data link layer?

2 Answers   TeleTech,

1. What is the difference between layer 2 and layer 3 in the OSI model? 2. What is the difference between a hub, switch, and router? 3. What is a VLAN? 4. What is the difference between TCP and UDP? 5. How do you distinguish a DNS problem from a network problem? 6. What is a runt, Giant, and collision? 7. What is a broadcast storm? 8. What is the purpose of VRRP? 9. What is a VPN? 10. What information about a peer would I need to establish a VPN? 11. What is a full-class C in CIDR notation? 12. What is a default route? 13. What is a metric? 14. What is a MAC address? 15. What is ARP/RARP? 16. Describe a TCP connection sequence 17. What is MTU? 18. What other TCP setting can you modify besides MTU to shorten packets?

2 Answers   247Customer, Bharat BPO, Verinon Technology Solutions,

What is datagram, datagram packets and datagram sockets?

1 Answers   HP, Network,

Define Wireless Networks

0 Answers   Hughes,

What is meant by DCE and DTE when it comes to Router?

3 Answers  

Convert the IP address 197.228.17.56 into binary ?

0 Answers  

how do u share printer through FTP(fire transfer protocol)?

0 Answers  

what is upsizing and downizing?

0 Answers