Golgappa.net | Golgappa.org | BagIndia.net | BodyIndia.Com | CabIndia.net | CarsBikes.net | CarsBikes.org | CashIndia.net | ConsumerIndia.net | CookingIndia.net | DataIndia.net | DealIndia.net | EmailIndia.net | FirstTablet.com | FirstTourist.com | ForsaleIndia.net | IndiaBody.Com | IndiaCab.net | IndiaCash.net | IndiaModel.net | KidForum.net | OfficeIndia.net | PaysIndia.com | RestaurantIndia.net | RestaurantsIndia.net | SaleForum.net | SellForum.net | SoldIndia.com | StarIndia.net | TomatoCab.com | TomatoCabs.com | TownIndia.com
Interested to Buy Any Domain ? << Click Here >> for more details...


Identify the correct pair of Novell Ethernet encapsulation and

Cisco terminology?

A.) Ethernet II, Snap

B.) Ethernet 802.3, Novell-Ether

C.) Ethernet SNAP, Arpa

D.) Ethernet 802.2, Snap



Identify the correct pair of Novell Ethernet encapsulation and Cisco terminology? A.) Ethernet..

Answer / guest

Answer: B

The default IPX LAN encapsulation is Novell-Ether which is 802.3

Is This Answer Correct ?    2 Yes 0 No

Post New Answer

More CCNA Interview Questions

Identify the 3 major functions at layer 3 of the OSI model? A.) Forwarding process B.) Logical addressing C.) End-to-end connnections D.) Path selection E.) MAC address examination F.) Network monitoring

2 Answers  


What is the function of Layer 2 Device?

3 Answers  


Suppose we have 4 switches runing in VTP mode. So when i create a VLAN in Server Switch this VLAN info reflect in all other switch. So question is - A) Suppose i m practicing this scenario in BOSON software, When a create a VLAN in server switch n ADD ports of switch to that VLAN, the same number of ports of client switch also belongs to dat VLAN. For example - In switch A (Server mode), i create a VLAN 7 name Hyderabad & port number 1, 2 & 3 put into this VLAN. Another Switch B (Client mode), its also showing that port number 1,2 & 3 belong the same VLAN. How cud it possible... As we know, VTP share only VLAN configuration information. Cud anyone explain it please....!!!! B)Same thing, when i m practicing in PACKET TRACER 5.0, its only showing that VLAN configuration information is shared. No port information is shared at all. I can manually configure individual switch port to respective VLAN as our wish. Cud anyone explain it please..!!!

3 Answers  


What is the checksum?

0 Answers  


Identify the command to determine if CDP is enabled? A.) show enable cdp B.) show cdp enabled C.) show cdp run D.) show cdp

2 Answers  


What is Cisco's default encapsulation method on serial interfaces? A.) ANSI B.) Cisco C.) Q933a D.) HDLC

2 Answers  


How does rip differs from igrp?

0 Answers  


What is the command to copy the IOS image to a TFTP server? A.) copy flash tftp B.) copy running-config tftp C.) copy ios tftp D.) copy startup-config tftp

2 Answers  


Can u convert an ethernet port to a serial port (or) vice versa ?

2 Answers   ADP,


What are the different types of password used in securing a cisco router?

0 Answers  


Identify 3 characteristics of the Network layer (OSI layer 3)? A.) Connnection oriented B.) Path determination C.) Supports multiplexing D.) Manages sessions E.) Packet forwarding

1 Answers  


What is the default encapsulation of Netware 3.12? A.) Ethernet_II B.) 802.5 C.) 802.2 D.) 802.3

1 Answers  


Categories