test cases on Fan
Answers were Sorted based on User's Feedback
Answer / durairaj. a
To check whether speed varies when regulator adjusted
To check whether it rotates in correct direction
To check whether it opeerates in low voltage
To check whether speed varies when voltage deflects
Is This Answer Correct ? | 30 Yes | 4 No |
Answer / preeti
all of u have written the -ve & +ve test cases but what is
the initial step from where u start test cases. as follows:
1. for 1step check Switch off -->Fan off (can make two
testcases with checking the position of Regulator)
2 on switch--.fan on(position of regulator on)
3 on switch-- fan off(position of regulator off)
4 test cases-->performance testing --> related the
speed,sound.
5 test cases>> -ve testing(wings,fan don't come down_
6. Usability-->(switch,regulator fan etc size,color
everything according to SRS. etc)
Is This Answer Correct ? | 27 Yes | 4 No |
Answer / sagarika mishra
step1: Switch on the fan & check whether it rotates or not.
step2: Check whether it rotates in correct direction.
step3: Check whether speed varies while adjusting the
regulator.
step4: switch off the fan & check it stops or not.
step5: Check the switch, color, regulator, fan size as per
the requirement or not.
Is This Answer Correct ? | 26 Yes | 3 No |
Answer / vids
We need to write test cases on following dimensions:
1) Functionality of Fan
2) Usability of Fan
3) Performance of Fan
4) Reliability of Fan
5) Look and Feel of Fan
Is This Answer Correct ? | 18 Yes | 5 No |
Answer / nish
1. check if the correct passes and fan rotates wheh theh
switch is on .
2.try to switch off and check if it has stopped .
3.check the freeness of the wings
4, check if does any sound while rotating or stopping
5. check the regulator if it user friendly to Adjust the
SPEED.
6.Change the speed and see if the rotaition also has teh
same change .
7.check the color and wings are straight and are well
attahed to the base .
Is This Answer Correct ? | 15 Yes | 4 No |
Answer / ankur maharaj
1-Check the fan position(should be in center according to room or hall)
2-Check the speed controlled by regulator
3-Check the height of fan(should be not so down and not so up)
4-Check the blades(minium 3 blades should be available)
5-Check the color,weight of the fan according to requirement
6-Check the fan state basic function(switch on/off)
7-Check the point from where fan is joined
8-check the space between blades of fan
9-Check the sound of fan when it start and off.
10-Check the capacitor of the fan(if two capacitor is there then the speed should be high than normal speed.
Is This Answer Correct ? | 3 Yes | 0 No |
Answer / kiranbabu
First know about Functionality of fan :
If it is Table Fan,Wall mounted,A/c,Car A.C,Hand Fan,
then go for Test case.
Is This Answer Correct ? | 3 Yes | 1 No |
Answer / rajshree
Check it should not stop immediately after doing swtch off.
Is This Answer Correct ? | 4 Yes | 3 No |
Answer / rojesh mishra
1:check all the components of fan is properly fitted or not.
2:switch off the fan check the fan and regulator position.
3.switch on the fan and check the regulator and fan position.
4.check fan is rotating in correct direction or not.
5.check the regulator if its user friendly to Adjust the SPEED.
6.check the speed of fan varies according to regulator or not.
8.check the performance of fan in high and low voltage.
7.check if does any sound while rotating or stopping .
8.check the look and feel of the fan is according to
requirement or not(color,wing size).
Is This Answer Correct ? | 3 Yes | 2 No |
Answer / vikas sachdeva
Negative Test case for fan
1. while rotation wings of fan should not come out.
2. Fan should not come down.
3. It should rotate at specified regulator level.
Is This Answer Correct ? | 11 Yes | 11 No |
Apart from the normal functional test cases written, list out some out of the box test scenarios to test the 'Replace' dialog box in a Notepad
please test case for calculator
write test cases for this senario if a job fails it should get restarted again this should happen for three times if it fails again then it should quit?
Below is a user story where Dave, a dispatcher, wants to use a console system to talk to Fred, a person in the field. Create a list of test cases to verify these requirements have been properly met. User Story 3004 - Dave wishes to call Fred using a phone. Dave needs the ability to dial digits for an outbound call to Fred. The dial pad will have a display area for the digits being dialed. The dial pad will have the following functionality: Recall Dial Tone, Recall Last Number, Backspace Current Digit, and Phonebook (Contacts) Access. The dial pad must be touchable and the “Dial” button will be used to initiate the call. A prototype version of the dial pad is attached below. The dial pad will have the following configurable properties: Display Color, Display Font, Foreground Color, Location and Size.
Explain the load testing?
How to write test case for this scenario. The Contact Information screen shall be displayed to the user during Case Create (Local Only),
hoe to write test cases for the below field --------------- --------------- browse upload
How to write test case for this scenario. The system shall allow for a wild card search for the first name with a minimum of one character.
How to write test case for this scenario. The text field that reads “ enter SDU number or the city and state of the SDU” shall be removed from the contact screen
How should the test cases be framed to validate the excel sheet?
Can anybody tell test cases for the following condition? In a railway reservation form, 4 types of ticket ranges are there like a) age up to 3, NO TICKET. b) age up to 7, HALF TICKET. c) age up to 60, FULL TICKET. d) age from 61, SENIOR CITIZEN QUOTA. if you enter age into the text box the relevant message should be displayed..... Eg. FULL TICKET.
How to write simple test cases?