Interested to Buy Any Domain ? << Click Here >> for more details...
Explain the syntax testing?
- 0 Answers
- 1206 Views
- I also Faced
- E-Mail Answers
No Answer is Posted For this Question
Be the First to Post Answer
Write test cases for bulb.
ATM REQUIREMENT TO BE TRANSLATED INTO TEST PLAN AND TEST CASES ATM REQUIREMENT AS FOLLOWS: Requirements Statement for Example ATM System The software to be designed will control a simulated automated teller machine (ATM) having a magnetic stripe reader for reading an ATM card, a customer console (keyboard and display) for interaction with the customer, a slot for depositing envelopes, a dispenser for cash (in multiples of $20), a printer for printing customer receipts, and a key-operated switch to allow an operator to start or stop the machine. The ATM will communicate with the bank's computer over an appropriate communication link. (The software on the latter is not part of the requirements for this problem.) The ATM will service one customer at a time. A customer will be required to insert an ATM card and enter a personal identification number (PIN) - both of which will be sent to the bank for validation as part of each transaction. The customer will then be able to perform one or more transactions. The card will be retained in the machine until the customer indicates that he/she desires no further transactions, at which point it will be returned - except as noted below. The ATM must be able to provide the following services to the customer: A customer must be able to make a cash withdrawal from any suitable account linked to the card, in multiples of $20.00. Approval must be obtained from the bank before cash is dispensed. A customer must be able to make a deposit to any account linked to the card, consisting of cash and/or checks in an envelope. The customer will enter the amount of the deposit into the ATM, subject to manual verification when the envelope is removed from the machine by an operator. Approval must be obtained from the bank before physically accepting the envelope. A customer must be able to make a transfer of money between any two accounts linked to the card. A customer must be able to make a balance inquiry of any account linked to the card. A customer must be able to abort a transaction in progress by pressing the Cancel key instead of responding to a request from the machine. The ATM will communicate each transaction to the bank and obtain verification that it was allowed by the bank. Ordinarily, a transaction will be considered complete by the bank once it has been approved. In the case of a deposit, a second message will be sent to the bank indicating that the customer has deposited the envelope. (If the customer fails to deposit the envelope within the timeout period, or presses cancel instead, no second message will be sent to the bank and the deposit will not be credited to the customer.) If the bank determines that the customer's PIN is invalid, the customer will be required to re-enter the PIN before a transaction can proceed. If the customer is unable to successfully enter the PIN after three tries, the card will be permanently retained by the machine, and the customer will have to contact the bank to get it back. If a transaction fails for any reason other than an invalid PIN, the ATM will display an explanation of the problem, and will then ask the customer whether he/she wants to do another transaction. The ATM will provide the customer with a printed receipt for each successful transaction, showing the date, time, machine location, type of transaction, account(s), amount, and ending and available balance(s) of the affected account ("to" account for transfers). The ATM will have a key-operated switch that will allow an operator to start and stop the servicing of customers. After turning the switch to the "on" position, the operator will be required to verify and enter the total cash on hand. The machine can only be turned off when it is not servicing a customer. When the switch is moved to the "off" position, the machine will shut down, so that the operator may remove deposit envelopes and reload the machine with cash, blank receipts, etc. The ATM will also maintain an internal log of transactions to facilitate resolving ambiguities arising from a hardware failure in the middle of a transaction. Entries will be made in the log when the ATM is started up and shut down, for each message sent to the Bank (along with the response back, if one is expected), for the dispensing of cash, and for the receiving of an envelope. Log entries may contain card numbers and dollar amounts, but for security will never contain a PIN.
how to write a test procedure & test log for login system
Test cases on uplaoding files
12 Answers GE, HP,
what are the possible test cases of an VOIP phone
How to write test case for this scenario. The system shall allow for a wild card search for the first name with a minimum of one character.
what will be testcases for job portal such as naukri.com , monster.com (as existing user)
pls i want test cases for oss? whts the process of oss testing
What is the logic testing?
Can some body help to write possible test cases for a credit card at POS (point of sale)
how to write test cases for testing databases,especially for testing and writing test cases for stored procedures.any real time database testers.please answer me. some real time database tester please answer my question as soon as possible.my need is such that. else mail answer at ina.ref@gmail.com
1 Tarot 1.1 Purpose - Tarot tool will duplicate the tarot-reading process for the user online. - Tarot is a craft that uses a deck of 78 cards to predict a user’s past, present and future. - The cards are picked by the user and arranged in a specific spread, which represents points in his past, present, and future; based on the meanings of the cards selected, interpretations are given. 1.2 Scope Only for registered user. 1.3 User Interface User Interface: 1. Question – This is only for user experience, and has no bearing on the formulae / process. Simple long text box. 2. Selection of field – radio button selection of 1 of 3 choices(Love, Career, Personal), which affects 1 of 3 card- meaning databases to be used. After selection, the unselected databases do not affect or interact with the system. 3. Spread Selection – radio button selection of 1 of 3 choices(Celtic Cross, Horse Shoe, Simple 3 Card). This determines the number of cards being picked and the specific spread database to be used. This also affects the specific report format being used, as well as the card- selection GUI. 4. Card Selection – based on the input 3, a specific layout is shown where the user needs to identify X number of cards (X also determined by input 3) which are then shown in the spread. Every card selection identifies the spread position constants (A, B, C, etc) with specific variable values (Card numbers) creating an array. Report format will display on a separate new page, in the following sequence – - Statement of question asked - Selection of field - Selection of spread - Detailed description of position data, positions identified as per spread selection - Card meaning as picked in field selection 1.4.5 Interfacing/Sourcing Details 1.4.5 Rules and Conditions - Data needs to be calculated for all fields, but only a maximum of 3 cards data should be shown in the free report. For the rest, a payment would be required. - Payment reports not in phase 1 - The report needs to be emailable (so functionality to convert to text file / html document should exist, which will then be emailed to the user’s email address).
Automation Testing 
