Answer / vimal

1. Check for the appropriate no of buttons?
2. What happen if I touch the open button twice?
3. What happen when I press open button while lift is
moving and it is in the middle of the two floors?
4. What happen when I press the open button for some time?
5. Check for the sound when lift is opening.
6. Check for the direction by pressing up and down button.
7. Enter in the lift specify the floor say 4 and check for
the corresponding floor?
8. Lift is moving and the power break off. Does the alarm
blow in the control room that there is power break off?
9. Also check for the case how the inside person inform the
lift man that he got stuck in the lift (if there is phone
button does it works)?
10. Also check for the response time to start lift again?
11. When a person is in the lift any light is there or not?
12. How many persons at a time will carry the lift in the
since in moving time.
13. With out load if we press the up button is it moving or
not.
14. What happen with out specifying the floor number if we
press the up or down?
15. What happen if the lift is in over load mode (over load
sound will come before moving or it moves).
16. With out load if we press the up button and specify the
floor number what is happening?
17. Is the door get closed itself or have to close manually.
18. If the door closed automatically check for the closing
time?
19. If the door closed automatically also check for the
sensor? Suppose the closing time is 2 min and it passed and
people are still getting in. What happen does the door get
closed or wait for the people to get in?
20. What happen when you press the same floor number on
which lift is already there?
21. After getting into the lift one person is there he
wants to go up but we want to go down already he specified
the floor number before we enter in to the lift. After that
we specified our floor number then what will be the
priority of the lift?
22. Lift is empty and is moving downwards I entered and
want to go up. Is there the button to change the direction
of lift and the button working?
23. Is the floor number displayed up in side the lift
correct?
24. When happen when the out side person want to open the
door but
Inside person wants to close the door at the same time.

Answer / smita

Positive Test Cases:
1.Checking the Functionality of Lift by Pressing appropriate
buttons.
(The lift should goto the respective floor accordingly)
2.Checking the Functionality of Infrastructure like
Doors(grills), light, bell.
Negative Test Cases:
1.Pressing downward button when lift is going up.

Answer / prapulla

Ans: First list made with which meterial.(Is it made by
steel or iron.)
2.doors or grill type or door type.
3.side of the door buttons switch board is there or not.
4.In that switch board how many buttons are there.
5.when i touch the open button is that lift opening or not
6.if i touch the open button two times what is happening in
the lift.
7.when lift is openingin thsat time i'll check am i hearing
sound or not
8.after entering in to the lift press up button.In which
direction i am moving?
9.after entering in to the lift press down button.In which
direction i am moving?
10.when a person is in the lift any light is there or not?
11.How many persons at a time will carry the lift in the
sence in moving time.
12.with out load if we press the up button is it moving or
not.
13.with out specify the floor number if we press the up or
down button what is happening?
14.when the lift is in over load mode what is happening in
the lift(over load sound will come).
15.with out load if we press the up button and specify the
floor number what is happening?
16.after entering in to the lift doors are automatically
closing or we have to close?
17.when lift is in ground floor we are going inside the
lift and specify the floor number zero(ground floor).then
what is happening.
18.after getting into the lift one person is there he wants
to up but we want to go down already he specified the floor
number before we enter in to the lift.after words we
specified our floor number then what is happening?
19.when we are in out side we want to open the door.but
inside person want's to close the door at time we both are
operating the lift then what will happen?

Answer / venkateswararao.ch

positive Testing:
1.i want to press door open button.
2. when the door open enter in to the lift
3.press number button which floor u want to go
4.press the close button.
5.check howmuch weight lift can be bear up.
6.if fan is available on the switch of fan.
7.if light is avaiable then switch on the light.
8.obeserve howmuch time it would be taken for reaching our
floor(which number button we pressing when we enter in to
the lift).
9.when we are reaching the our floor observe if the door is
opend r not.
10.oserve when we r come out from lift, door closing
operation.

Negative Testing:
1.press enter button when we are in out side.
2.observe door opening operations.
3.wait outside some time when door is opend.
4.when we are inside observe door closing operations with
out pressing closing button.
5.observe door operations when we middle in the door.
6.observe lift working when the power is off.
7.observe the lift working when the power will be low
voltage.
8.observe the lift working operations when the heavy load
is having in the lift.
9.verify door closing operations when the heavy load is in
the lift.
10.verify if power is suddenly off when lift is in working

Answer / vijay

1. Check the Numbers of lift in a building.
2. Check for the buttons and the LCD SCreen at lift Door.
3. Inside the lift there should be accurate numbers of
buttons like numbers of Floor, Fan, Emergency, Light etc.
4. If there is power cut then lift should stop and wait for
power back up to restart. In this case Lift should strrt
from the ground floor or either ends.
5. Lift should alarm if the Persons's weight is exceeding
the defined weight.
6. In Case fo Emergency like Fire or Earth Quake, Lift
should become deactive.

Answer / jhansi

lift function should be good andbuttons are easy to be
pressed.it can balance the weight.it is comfirtable to the
user.basic requrmens are light ,fan,doors must be strong
enough.lift cant move until the doors are entirely closed.

Answer / durairaj. a

To check the maximium capacity
To check the functionality of all buttons
To check the door opening when it reaches the corresponding
floor
To check whether it operates when power cut off
To check whether fan in ON in the lift
To check whether it stops at correct position

Answer / geeta

1.check if the lift is stopping at the correct floor using
up and down button
2.check for the load capacity and verify that the if the
load inside lift is more than the capacity of lift, warning
should be issued through indicator.
3.Verify that the correct floor is announced when the door
opens at that floor .
4.The door should not open in between when the lift is
moving up or down even when you press the open button
5. correct indicator should glow for e.g If it is moving
down the down indicator should glow similarly with up indicator
6.buzzer should work

Answer / shalini

1.Whenever we enter into the lift and select any floor
suppose 1st floor then the button should be enabled and
should stop in the corresponding floors only.

2.when ever the lift is moving upward direction if we press
the open button the lift should not get opened.

3.verify whether the display screen is working correctly or not.

4.verify that whenever the lift moves up and down lights and
fans should be turned on.

5.verify whether the lift doors should get closed when the
person in the lift presses the close button and at the same
time when the doors are getting closed if any other person
enters the lift the sensor should work properly i.e. the
lift should get opened.

6 Verify that the closing time of the lift is same at each
and every floor

7.whenever the lift is in a stand by position at any
particular floor check whether the doors of the lift are
closed or not.

8.whenever the persons in the lift are more then an alarm
sound should be invoked.

9.whenever the lift is moving if there is any power loss
check whether the lift is stoped at the same point and when
the power is turned on the lift should go to the
corresponding(default) floor only for eg:- ground floor.

10.whenever the lift doors are closed check whether the lift
is moving with the same speed or not.

Negative scenarios:

1.when the lift moves ensure that the lift does not shake
its movement.

2.the display screen present in the lift should not show the
other floor number for eg:- 2 when we reach 1st floor.

Answer / abhay

first of all check the power is being or not.
check the buttons are enabled to the users.
press the downward button, then the lift will come down at
exact place.
check when we enter to lift and press the close button is
working properly or not.
check the lift fan is working or not.
give the sound depend by abnormal weight.
and the lift will stop by expected place.

There is a web portal that has been tested and working properly. Now a new module called as the "online shopping module" had been added. Ther are two search pages , a normal search and an advanced search page. You are responsible for only these two modules for testing Questions 1) Write the scope for testing 2)High level test scenarios 3)Test case for one high level test scenario 4) Assumptions while writing the test case 5) Questions that u might need to ask as a QA to test the application NOTE- the requiremnts wont be given. One has to assume the requirements Please tell me how to test a search page and also please help me answer the above questions

2 Answers   Infosys, Zycus Infotech,

how we test the login page using jwebunit test case...

0 Answers   CTS,

how to write test case for GUI testing and tell me in brief about GUI and all related WEB based testing..if possible then pls give example of its test case...m new in testing........thannx for help in advance

0 Answers  

can any body help me with providing a a case for usability testing...

0 Answers  

You are Only tester for Onsite client team, this team is on holiday for two day from monday & SIT is started with plan end date is friday in this case if all server,application is crashed then as a tester what will be your approach

0 Answers   Cognizant, Tieto,

What are the Test Cases for an email id for username and password?

2 Answers  

what are the possible test cases of an VOIP phone

2 Answers   Adobe,

Please give me some example of the test cases to test the Google map search

3 Answers   CTS,

please can anybody tell me, how to indentify the test cases which can be automated from a given set of test cases, say 20.

2 Answers  

Explain the functional testing?

0 Answers  

Do anyone hav any knowledge about testing the Eftpos System??Like what kind of test cses that can be prepared for checking the system...

1 Answers  

What is a test case?

7 Answers