There is a game in that there are 20 levels an ordinary
person can play it up to 12th level.So if you are a tester
and if you have to test that game up to 20th level then how
u can test that game.
- 0 Answers
- 1631 Views
- I also Faced
- E-Mail Answers
No Answer is Posted For this Question
Be the First to Post Answer
IN MY APPLICATION SOME WINDOW IS THERE IT CONSISTS OF SOME 25 LABLES IN THOSE FOR THE ALREADY SELECTED ONE IT WILL SHOW THE BACKGROUND COLOR IS YELLOW WHILE CHECKING IT SHOULD CHECK THE ALL LABLES WHICH ONE IS HAVING YELLOW COLOUR backcolor=SwfWindow("ALTAIR").SwfWindow("Load Wafer").SwfLabel(" ").GetROProperty("backcolor") SUPPOSE LIKE DS IT WILL BE THERE THEN FOR THAT SwfLabel(" ") inside this how to specify is my doubt because i have to check all the 25 labels plz explain it how to specify that
Do you write test plan and test case?
how many test cases do u need to ship a product?
2.6.3 User Interface Different Polls could be present at different channels, pages within channels, and at home page. User interface for Poll will be as described below: - Beneath poll current result(running status) to be shown in graphical form(say progressing bar chart) all the time, in same window as poll. - Link ""All Polls >>"" to take user to Polls home page which will have all the active polls with results underneath. - All the polls not older than one month will come under Active polls category. - User can take Active open polls, but cannot react to Active closed polls. Can only view results of active closed polls. - No Interactives available for polls - "Add a comment", "Rate" - Registered User can take a poll only once, after that only result is shown to user. To unregistered user it will be open. 2.6.4 Interfacing/Sourcing Details - Polls is going to be a separate module, an internal application, which editor/admin can publish. - Admin/Editor should be able to publish polls on separate channels, pages. Assign closure dates. - Admin/Editor can upload images, change look n feel, add a brand, link/url to it. - System to capture user details(screen name/name, id, email id), do loyalilty points calculation and add to user loyality points. 2.6.5 Rules and Conditions Unless assigned a closure date, by default all Polls will be open for 30 days. this is the SRS how to write the test cases for the above functionalities help me
If there are 4 buttons New,Edit,Delete & Refresh for Item screen .May I have to write 4 different test cses for each button OR I can perform all operations[Create,Edit,Delete & refresh item] in a single tes case? Please reply as early as possible. It's very urgent to me
What are the properties of a good requirement?
testcases for waterbottle
For how many days (or) weeks you will test a product or software?
Write the 10 test cases for Telephone/Pen.
why do we need test cases?
ATM REQUIREMENT TO BE TRANSLATED INTO TEST PLAN AND TEST CASES ATM REQUIREMENT AS FOLLOWS: Requirements Statement for Example ATM System The software to be designed will control a simulated automated teller machine (ATM) having a magnetic stripe reader for reading an ATM card, a customer console (keyboard and display) for interaction with the customer, a slot for depositing envelopes, a dispenser for cash (in multiples of $20), a printer for printing customer receipts, and a key-operated switch to allow an operator to start or stop the machine. The ATM will communicate with the bank's computer over an appropriate communication link. (The software on the latter is not part of the requirements for this problem.) The ATM will service one customer at a time. A customer will be required to insert an ATM card and enter a personal identification number (PIN) - both of which will be sent to the bank for validation as part of each transaction. The customer will then be able to perform one or more transactions. The card will be retained in the machine until the customer indicates that he/she desires no further transactions, at which point it will be returned - except as noted below. The ATM must be able to provide the following services to the customer: A customer must be able to make a cash withdrawal from any suitable account linked to the card, in multiples of $20.00. Approval must be obtained from the bank before cash is dispensed. A customer must be able to make a deposit to any account linked to the card, consisting of cash and/or checks in an envelope. The customer will enter the amount of the deposit into the ATM, subject to manual verification when the envelope is removed from the machine by an operator. Approval must be obtained from the bank before physically accepting the envelope. A customer must be able to make a transfer of money between any two accounts linked to the card. A customer must be able to make a balance inquiry of any account linked to the card. A customer must be able to abort a transaction in progress by pressing the Cancel key instead of responding to a request from the machine. The ATM will communicate each transaction to the bank and obtain verification that it was allowed by the bank. Ordinarily, a transaction will be considered complete by the bank once it has been approved. In the case of a deposit, a second message will be sent to the bank indicating that the customer has deposited the envelope. (If the customer fails to deposit the envelope within the timeout period, or presses cancel instead, no second message will be sent to the bank and the deposit will not be credited to the customer.) If the bank determines that the customer's PIN is invalid, the customer will be required to re-enter the PIN before a transaction can proceed. If the customer is unable to successfully enter the PIN after three tries, the card will be permanently retained by the machine, and the customer will have to contact the bank to get it back. If a transaction fails for any reason other than an invalid PIN, the ATM will display an explanation of the problem, and will then ask the customer whether he/she wants to do another transaction. The ATM will provide the customer with a printed receipt for each successful transaction, showing the date, time, machine location, type of transaction, account(s), amount, and ending and available balance(s) of the affected account ("to" account for transfers). The ATM will have a key-operated switch that will allow an operator to start and stop the servicing of customers. After turning the switch to the "on" position, the operator will be required to verify and enter the total cash on hand. The machine can only be turned off when it is not servicing a customer. When the switch is moved to the "off" position, the machine will shut down, so that the operator may remove deposit envelopes and reload the machine with cash, blank receipts, etc. The ATM will also maintain an internal log of transactions to facilitate resolving ambiguities arising from a hardware failure in the middle of a transaction. Entries will be made in the log when the ATM is started up and shut down, for each message sent to the Bank (along with the response back, if one is expected), for the dispensing of cash, and for the receiving of an envelope. Log entries may contain card numbers and dollar amounts, but for security will never contain a PIN.
how to write test case for GUI testing and tell me in brief about GUI and all related WEB based testing..if possible then pls give example of its test case...m new in testing........thannx for help in advance
Automation Testing 
