What are the destination target options?

1994

How will you change the default destination of open hub files?

2017

how u burst the reports? if u r bursted reports is not reached to destination how u identify???

11612

Hi, While I am trying to produce a html report from SAS interactive screen, I am always getting an error. I have attached the result of interactive execution with this. Please help me on this. NOTE: All profile changes will be lost at the end of the session. 1 *libname ia 'U19K.CAPS.SAS'; 2 3 /*Data declaration*/ 4 data work.staff; 5 infile 'U19K.CAPS.SAS (RAWDATA1)'; 6 input LastName $ 1-10 FirstName $ 11- 20 7 JobTitle $ 21-23 Salary 24- 28 8 BirthDat $ 29-37 Gender $ 38 9 run; 10 11 /*Basic "format" statement*/ 12 /*assign range of values to a variable and use it*/ 13 /*'$' should be used for a alphanumeric manipulation*/ NOTE: The infile 'U19K.CAPS.SAS(RAWDATA1)' is: Dsname=U19K.CAPS.SAS (RAWDATA1), Unit=3390,Volume=XTD007,Disp=SHR,Blksize=6160, Lrecl=80,Recfm=FB NOTE: 20 records were read from the infile 'U19K.CAPS.SAS (RAWDATA1)'. NOTE: The data set WORK.STAFF has 20 observations and 7 variables. NOTE: The DATA statement used 0.01 CPU seconds and 7537K. NOTE: The address space has used a maximum of 3676K below the line and 15196K above the line. 14 proc format; 15 value Salrange low- 10000='Below' 16 10001- 20000='Medium' 17 20001- High='Above'; NOTE: Format SALRANGE has been output. 18 value $Gender F='Female' 19 M='Male'; NOTE: Format ÅGENDER has been output. 20 run; NOTE: The PROCEDURE FORMAT used 0.00 CPU seconds and 7523K. NOTE: The address space has used a maximum of 3676K below the line and 15196K above the line. 21 22 /*ODS-Output delivery system to create html file*/ 23 ods listing close; 24 ods html file='C:\Documents and Settings\u19k\Desktop\html1.html'; NOTE: Writing HTML Body file: C:\Documents and Settings\u19k\Desktop\html1.html ERROR: Invalid file, C:\DOCUMENTS AND SETTINGS\U19K\DESKTOP\HTML1.HTML. WARNING: No body file. HTML output will not be created. 25 26 /*Basic "label" statement*/ 27 proc print data=work.staff split=''; 28 label LastName='Last Name' 29 FirstName='First Name' 30 JobTitle='Job Title' 31 Salary='Annual Salary'; 32 format Salary Salrange. Gender $Gender.; 33 var LastName FirstName JobTitle Salary Gender; 34 title 'Employee database'; 35 run; WARNING: No output destinations active. NOTE: The PROCEDURE PRINT used 0.00 CPU seconds and 10275K. NOTE: The address space has used a maximum of 3676K below the line and 15196K above the line. 36 37 /*ODS-html closing*/ 38 ods html close; 39 ods listing;

2726

Question 1 A low-level format received by a floppy disk does what? a. Adds a root directory b. Includes a FAT (File Allocation Table) c. Stores 720K d. Creates a structure of sectors, tracks, & cluster. Question 2 A user is complaining of problems. You find that upon startup, the IBM machine give two beeps alerting you to a POST error. Error code 301 shows. What is wrong with this machine? a. There is a monitor error. b. There is a keyboard error. c. This is not a POST error. Two beeps indicates a motherboard error. d. There is a serial card error. Question 3 What is this an example of? A. A 30-pin SIMM B. A 72-pin SIMM C. A 168-pin DIMM D. C-RIMM Question 4 Bridges are capable of which? a. Expanding the length of a network segment. b. Acting as a firewall. c. Segmenting networks. d. Communication of computers on a LAN. Question 5 Which is true of a female DB 15-pin video port? a. It has 2 rows of 5 pinholes. b. It has 3 rows of 5 pinholes. c. It has one row of 8 pinholes and one row of 7 pinholes d. It has one row of 6 pinholes and one row of 9 pinholes Question 6 You have just installed two hard drives into the same machine. One is set up as the slave and both are on the same IDE channel. You notice that the drive's LED light is constantly lit on the slave drive. What do you need to do to fix this? a. Troubleshoot the slave drive by reconfiguring the slave to be the master, removing the original master drive, then rebooting. b. Disable the secondary controller in the BIOS. c. Manually enter the drive settings on the BIOS. d. Install more memory. Question 7 SVGA and Ultra VGA are two distinct video standards. True or False? a. True. b. False. Question 8 SVGA is represented by all of the following resolutions except: a. 1600 x 1200 b. 800 x 600 c. 640 x 480 d. 1280 x 1024 Question 9 Which is true of an Active Matrix LCD? a. The LCD is divided into two halves. b. The LCD is divided into two halves. c. Each pixel is constantly refreshed. d. The pixels are fixed. e. It uses more electricity. f. None of the above. Question 10 What are the correct stages and order of the EP laser printing process? a. Cleaning, Writing, Conditioning, Developing, Fusing, Transferring, and End of Cycle b. Cleaning, Conditioning, Writing, Developing, Transferring, Fusing, & End of Cycle c. Erasing, Writing, Heating, Developing, Fusing, Transferring, & End of Cycle d. Conditioning, Erasing, Writing, Developing, Fusing, Transferring, & End of Cycle Question 11 Choose the correct associations (pick 2). a. 802.4 – Internetworking b. 802.6 - Metropolitan area network c. 802.9 - Integrated voice and data networks d. 802. 11 - Token ring LAN Question 12 What is the function of a Layer 2 switch ? a. forwards data based on logical addressing b. duplicates the electrical signal of each frame to every port c. learns the port assigned to a host by examining the destination MAC address d. determines which interface is used to forward a frame based on the destination MAC address. Question 13 An administrator would like to connect ten workstations on a 192.168.0.0/24 network. The device selected by the administrator must allow connectivity between hosts without sharing bandwidth. Which device would be appropriate? a. Hub b. Router c. Switch d. Repeater Question 14 Which devices are primarily used to extend cable segments within a collision domain by regenerating the data signals? (Choose two.) a. switch b. repeater c. router d. bridge e. hub Question 15 Which networking devices use the MAC address to make forwarding decisions? (Choose two.) a. NIC b. bridge c. hub d. switch e. repeater Software : 1. Briefly describe the data type conversion feature of Oracle SQL and PL/SQL. 2. What is INDEX? Describe its benefits. 3. Write down the name of five most popular RDBMS. 4. What is UML? Write some Diagram name. 5. What is HTML and XML? 6. What is CSS and AJAX and their benefits? 7. What is software quality assurance? 8. Describe components of a typical test plan? 9. What is the difference between QC and QA? 10. What is Verification and Validation? 11. What diff b/w black box and white box testing? 12. What is the difference between System Testing, Integration Testing & System Integration Testing? ATI Limited Question Paper Duration Time : 1 Hour and 30 Minutes Question 1 A low-level format received by a floppy disk does what? a. Adds a root directory b. Includes a FAT (File Allocation Table) c. Stores 720K d. Creates a structure of sectors, tracks, & cluster. Question 2 A user is complaining of problems. You find that upon startup, the IBM machine give two beeps alerting you to a POST error. Error code 301 shows. What is wrong with this machine? a. There is a monitor error. b. There is a keyboard error. c. This is not a POST error. Two beeps indicates a motherboard error. d. There is a serial card error. Question 3 What is this an example of? A. A 30-pin SIMM B. A 72-pin SIMM C. A 168-pin DIMM D. C-RIMM Question 4 Bridges are capable of which? a. Expanding the length of a network segment. b. Acting as a firewall. c. Segmenting networks. d. Communication of computers on a LAN. Question 5 Which is true of a female DB 15-pin video port? a. It has 2 rows of 5 pinholes. b. It has 3 rows of 5 pinholes. c. It has one row of 8 pinholes and one row of 7 pinholes d. It has one row of 6 pinholes and one row of 9 pinholes Question 6 You have just installed two hard drives into the same machine. One is set up as the slave and both are on the same IDE channel. You notice that the drive's LED light is constantly lit on the slave drive. What do you need to do to fix this? a. Troubleshoot the slave drive by reconfiguring the slave to be the master, removing the original master drive, then rebooting. b. Disable the secondary controller in the BIOS. c. Manually enter the drive settings on the BIOS. d. Install more memory. Question 7 SVGA and Ultra VGA are two distinct video standards. True or False? a. True. b. False. Question 8 SVGA is represented by all of the following resolutions except: a. 1600 x 1200 b. 800 x 600 c. 640 x 480 d. 1280 x 1024 Question 9 Which is true of an Active Matrix LCD? a. The LCD is divided into two halves. b. The LCD is divided into two halves. c. Each pixel is constantly refreshed. d. The pixels are fixed. e. It uses more electricity. f. None of the above. Question 10 What are the correct stages and order of the EP laser printing process? a. Cleaning, Writing, Conditioning, Developing, Fusing, Transferring, and End of Cycle b. Cleaning, Conditioning, Writing, Developing, Transferring, Fusing, & End of Cycle c. Erasing, Writing, Heating, Developing, Fusing, Transferring, & End of Cycle d. Conditioning, Erasing, Writing, Developing, Fusing, Transferring, & End of Cycle Question 11 Choose the correct associations (pick 2). a. 802.4 – Internetworking b. 802.6 - Metropolitan area network c. 802.9 - Integrated voice and data networks d. 802. 11 - Token ring LAN Question 12 What is the function of a Layer 2 switch ? a. forwards data based on logical addressing b. duplicates the electrical signal of each frame to every port c. learns the port assigned to a host by examining the destination MAC address d. determines which interface is used to forward a frame based on the destination MAC address. Question 13 An administrator would like to connect ten workstations on a 192.168.0.0/24 network. The device selected by the administrator must allow connectivity between hosts without sharing bandwidth. Which device would be appropriate? a. Hub b. Router c. Switch d. Repeater Question 14 Which devices are primarily used to extend cable segments within a collision domain by regenerating the data signals? (Choose two.) a. switch b. repeater c. router d. bridge e. hub Question 15 Which networking devices use the MAC address to make forwarding decisions? (Choose two.) a. NIC b. bridge c. hub d. switch e. repeater Software : 1. Briefly describe the data type conversion feature of Oracle SQL and PL/SQL. 2. What is INDEX? Describe its benefits. 3. Write down the name of five most popular RDBMS. 4. What is UML? Write some Diagram name. 5. What is HTML and XML? 6. What is CSS and AJAX and their benefits? 7. What is software quality assurance? 8. Describe components of a typical test plan? 9. What is the difference between QC and QA? 10. What is Verification and Validation? 11. What diff b/w black box and white box testing? 12. What is the difference between System Testing, Integration Testing & System Integration Testing?

6990

Tell something about u r favourite holiday destination?

3984

A family, planning a weekend trip, decides to spend not more than a total of 8 hours driving. By leaving early in the morning, they can average 40 miles per hour on the way to their destination. Due to the heavy Sunday traffic, they can average only 30 miles per hour on the return trip. What is the farthest distance from home they can plan to go? (EXPLAIN WITH PROPER STEPS)

3447

what is destination translation? what will happen if we don't use VTP?

2969

HOW TO DELETE THE SINGLE QUOTATION IN THE SOURSE TO LOAD THE DATA TO DESTINATION

1898

hi ... i've created one crystal report in windows form and one crystalreportviewer .. the following is my code.. in form1.cs file try { ExportOptions CrExportOptions; DiskFileDestinationOptions CrDiskFileDestinationOptions = new DiskFileDestinationOptions(); PdfRtfWordFormatOptions CrFormatTypeOptions = new PdfRtfWordFormatOptions(); CrDiskFileDestinationOptions.DiskFileName = "c:\\csharp.net- informations.pdf"; CrExportOptions = cryRpt.ExportOptions; { CrExportOptions.ExportDestinationType = ExportDestinationType.DiskFile; CrExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat; CrExportOptions.DestinationOptions = CrDiskFileDestinationOptions; CrExportOptions.FormatOptions = CrFormatTypeOptions; } cryRpt.Export(); } the above code is saving the file into pdf into specified path.. but i dont want to save a file i should get direct print preview and have a option to print .. As we do in web application using crystal report viewer clicking print and report will be opened in pdf.. and the click print.. i want the same function as we do in web application... i'm writing code in c#.net hope the above explaination will be understood clearly..

3609

write a C program: To search a file any word which starts with ?a?. If the word following this ?a? starts with a vowel.Then replace this ?a? with ?a? with ?an?. redirect with the output onto an output file.The source file and destination file are specified by the user int the command line.

2820

hi actully i hav form columns with origin and destination names .as like as i need to create one more column with name amount. my requirement is when i select origin and destination columns automatically i need to get amount from database.how can i. please tel me with relative code

2731

senario: There are two switches connected via trunk port.One end station is connected to each switch via access port. All the ports are in same VLAN.All the ports have same speed 1Gbps.Start sending 1Gbps traffic from one end station to other. Determine percentage of traffic received by destination end station.

2453

 A problem solving approach works well for a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

3097

You're implementing a medieval strategy game in which pikemen should always walk in front of archers, and catapults should always be behind the archers. Explain how you could implement the movement system to ensure that you keep pikemen in front and catapults in the rear as much as possible. Explain how your answer might be different depending on whether or not the units simply need to end up in that configuration when they reach that destination, or if they need to maintain that formation while moving.

665