Hi There, I am currently studying my CCNA and doing quite a
bit of practice exams. I recently came across a questions
which totally confused my and I needs someone to explain it
to me please, the questions is: Which routes are contained
in the following summarisation address. 192.18.176.0/21. The
posiible answers are, A. 192.18.183.255, B. 192.18.159.2, C.
192.18.194.160, D. 192.18.179.4, E. 192.18.183.41, F.
192.18.184.45. According to the answer sheet the correct
ones are E and F, but when I work it out I get D,E and F,
please help
- 4 Answers
- 6639 Views
- I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / john
your sheet must be wrong... the answers are D&E...
F is part of the 192.18.184.0/21 subnet, not a part of 192.18.176.0/21 subnet.. got it?
| Is This Answer Correct ? | 3 Yes | 1 No |
Answer / tallone
Oop I made a error in my question and could not find the
Edit option so I posted the amendment in the answer option
but the lat part should read, "but when I work it out I get
D and E" not "but when I work it out I get D,E and F,", Thanks
| Is This Answer Correct ? | 4 Yes | 3 No |
Answer / lokesh kumar verma
A,D,E 192.18.176.0/21 means block size is 8 and 192.18.176.0 will be NID. so according 3rd octate 192.18.176.0 to 192.18.183.255 is lies the range so answer will be A,D,E
| Is This Answer Correct ? | 1 Yes | 0 No |
Answer / meenakshi
Not to worry and dont get confused sometime in question they
make mistakes.what you have entered and studied is correct
ans to the question is D,E only as they have asked you /21
and as it is class c so till /21 common find out from option
A to F and we get D,E.
| Is This Answer Correct ? | 1 Yes | 1 No |
Identify the command that configures the bandwidth to 56K? A.) Router(config-if)# bandwidth 56000 B.) Router(config-if)# bandwidth 56k C.) Router(config)# bandwidth 56 D.) Router(config-if)# bandwidth 56
How many Frame-relay encapsulation types are available with Cisco routers? A.) Four B.) Two C.) Five D.) Three
What are two ways IPX supports multiple logical networks on an individual underrate? (Choose two) A. network number B. routing protocol C. encapsulation type D. autonomous system number
What does the 'S' mean when looking at the routing table? A.) Statically connected B.) Directly connected C.) Dynamically attached D.) Shutdown route
1) How a router established a neighbor relation ship in ospf
Identify 2 functions of IPX access-lists? A.) Control SAP traffic B.) Limit number of Novell servers on a network C.) Limit number of workstations on a network D.) Block IPX traffic
What is the difference between ‘bit rate’ and ‘baud rate’?
Identify the command that configures serial0 for PPP encapsulation? A.) Router(config)# encapsulation ppp B.) Router(config-if)# encapsulation serial ppp C.) Router(config-if)# encapsulation ppp D.) Router# encapsulation ppp
Which of the following are examples of the Datalink Layer? A.) LLC B.) SQL C.) TCP D.) Token Ring E.) IP
How does a switch use store and forward? A.) By using a Class I repeater in a collision domain B.) The LAN switch copies the entire frame into its onboard buffers and then looks up the destination address in its forwarding, or switching, table and determines the outgoing interface C.) By using broadcast addresses as source addresses D.) The switch waits only for the header to be received before it checks the destination address and starts forwarding the packets
What is the difference between private ip and public ip?
Why Clock rate command is not configured on ethernet interface of a router?
CCNA 
