Answer / dnyanada

We can manually give the IP address to the switch there is
no predfined IP address of the switch. The IP address is
depends onto the network administrator

Answer / mvadivell

The switch can obtain its IP configuration automatically
using one of the following protocols:

?Bootstrap Protocol (BOOTP)

?Dynamic Host Configuration Protocol (DHCP)

?Reverse Address Resolution Protocol (RARP)

The switch makes BOOTP, DHCP, and RARP requests only if the
sc0 interface IP address is set to 0.0.0.0 when the switch
boots up. This address is the default for a new switch or a
switch whose configuration file has been cleared using the
clear config all command. BOOTP, DHCP, and RARP requests
are only broadcast out the sc0 interface.

Answer / ramesh m

When you boot your switch, the DHCP client can be invoked
and automatically request configuration information from a
DHCP server when the configuration file is not present on
the switch.

Answer / dikshit

The switch can obtain its IP configuration automatically
using one of the following protocols:

Bootstrap Protocol (BOOTP)
Dynamic Host Configuration Protocol (DHCP)
Reverse Address Resolution Protocol (RARP)

The switch makes BOOTP, DHCP, and RARP requests only if the
sc0 interface IP address is set to 0.0.0.0 when the switch
boots up. This address is the default for a new switch or a
switch whose configuration file has been cleared using the
clear config all command. BOOTP, DHCP, and RARP requests
are only broadcast out the sc0 interface.

Answer / sachin m

Automatically using one of the following protocols

Bootstrap Protocol (BOOTP)
Dynamic Host Configuration Protocol (DHCP)
Reverse Address Resolution Protocol (RARP)

thank you

Answer / s.m.feroz ahmed

Hi,

127.0.0.0 is the Ip address fo Switch or it is also called
as LoopBack Address for self testing whether the device is
working properly or not.

Is the PLUS feature set required?

1 Answers   Cisco,

what is the difference between collision domain and broadcast domain?

6 Answers   HCL,

What are the differences between DMT and G.Lite?

1 Answers   Cisco,

Is a cross-over cable needed to connect the EZ serial switch to another hub or some type of device?

6 Answers  

What are the differences between an Ethernet switch and a hub?

4 Answers   ABC,

How can I utilize AAL2 support?

1 Answers   Cisco,

What are the advantages of the Cisco integrated solution (Cisco 2600/3600 Series with ADSL WIC) over a two -box solution consisting of a router with an external DSL modem?

1 Answers   Cisco,

Does the WIC support auto detection?

1 Answers   Cisco,

How to network the computers together with the switch?

4 Answers  

What are the differences between broadband router and Ethernet switch?

3 Answers  

What is the performance of the ADSL WIC?

1 Answers   Cisco,

What Cisco IOS Release is required?

1 Answers   Cisco,