Total Answers Posted # 107
Total Answers Posted for My Questions # 102
Total Views for My Questions # 451449
Users Marked my Answers as Correct # 1365
Users Marked my Answers as Wrong # 212
Question { 22478 }
Hi, All
I am configuring EIGRP in Packet tracer, after configuring
all the things it is not working but in one condition it is
working fine if i am putting all my router and network
withing one network subnets e.g. 172.16.0.0 or 10.0.0.0 but
whenever i am puting different network subnets e.g. in one
network it is RA(config-if)#=ip address 10.0.0.1, and in
fa0/0= 192.168.1.10 and in RB(config-if)#10.0.0.2 (s1/0) and
in S1/1 11.0.0.1 and in fa 0/0 192.168.100.1 ,where as in
third router RC(config-if)#=ip address 11.0.0.2 and in fa
0/0 172.16.1.10 and after configuring all this serial is
showing up and protocol showing up but eigrp process not
taking place after adding eigrp configuration, i tried with
"no auto-summary" command but not working.. Suggest me where
i missing something? can mail me at : gtech.innovator@gmail.com
Answer
in GNS3 or ya Dynamips....!!! let us know... wat exactly
problem u r faceing. Coz nobody ever got problem like ur's..
dat u r faceing EIGRP. There is few limitation in Packet
Tracer. So try in on GNS3 or ya Dynamips.
| Is This Answer Correct ? | 0 Yes | 1 No |
Question { 22478 }
Hi, All
I am configuring EIGRP in Packet tracer, after configuring
all the things it is not working but in one condition it is
working fine if i am putting all my router and network
withing one network subnets e.g. 172.16.0.0 or 10.0.0.0 but
whenever i am puting different network subnets e.g. in one
network it is RA(config-if)#=ip address 10.0.0.1, and in
fa0/0= 192.168.1.10 and in RB(config-if)#10.0.0.2 (s1/0) and
in S1/1 11.0.0.1 and in fa 0/0 192.168.100.1 ,where as in
third router RC(config-if)#=ip address 11.0.0.2 and in fa
0/0 172.16.1.10 and after configuring all this serial is
showing up and protocol showing up but eigrp process not
taking place after adding eigrp configuration, i tried with
"no auto-summary" command but not working.. Suggest me where
i missing something? can mail me at : gtech.innovator@gmail.com
Answer
u can disclose ur name.. it wud be gud for communication. By
the way.... Download GNS3 from the bellow link...
http://www.gns3.net/download
After that download IOS image from rapidshare.com.. (Sry i
don't hv link). For GNS3 u sud hv min 1 GB RAM.. to operate
it. Its little bit complicated compare to BOSON/PACKET
TRACER/ROUTER SIMULATOR... all those.. !!!
Download GNS3 installation Guide also... Just search it on
google... n follow dat.. All the best..!!!
| Is This Answer Correct ? | 1 Yes | 1 No |
Question { 22478 }
Hi, All
I am configuring EIGRP in Packet tracer, after configuring
all the things it is not working but in one condition it is
working fine if i am putting all my router and network
withing one network subnets e.g. 172.16.0.0 or 10.0.0.0 but
whenever i am puting different network subnets e.g. in one
network it is RA(config-if)#=ip address 10.0.0.1, and in
fa0/0= 192.168.1.10 and in RB(config-if)#10.0.0.2 (s1/0) and
in S1/1 11.0.0.1 and in fa 0/0 192.168.100.1 ,where as in
third router RC(config-if)#=ip address 11.0.0.2 and in fa
0/0 172.16.1.10 and after configuring all this serial is
showing up and protocol showing up but eigrp process not
taking place after adding eigrp configuration, i tried with
"no auto-summary" command but not working.. Suggest me where
i missing something? can mail me at : gtech.innovator@gmail.com
Answer
always well come here.
Its nice to see u here.
Thanx & cheers dude..
| Is This Answer Correct ? | 0 Yes | 1 No |
Question { 4882 }
hi shain
i have got some virus who make the .exe file that is
duplicate of original file on my server 2007 windows can u
suggest me any anti virus
help help please help
Answer
RC/8.5.0i. Scan the drive. Hp it'll delete & repair ur
server files...
Check it out..!!
| Is This Answer Correct ? | 0 Yes | 0 No |
Question { 4882 }
hi shain
i have got some virus who make the .exe file that is
duplicate of original file on my server 2007 windows can u
suggest me any anti virus
help help please help
Answer
overcome from this problem....!!! This may be one more
sol... I dont hv proper idea..!!!
| Is This Answer Correct ? | 0 Yes | 0 No |
Question { 4929 }
Dear Mr. JITENDERA KUAMR SINHA how are and how is your
family? Anyway can u send me your personal email address?
Answer
are u and how is your family n kids bla bla bla...?
Hehehehehehe
| Is This Answer Correct ? | 0 Yes | 0 No |
Question { 4929 }
Dear Mr. JITENDERA KUAMR SINHA how are and how is your
family? Anyway can u send me your personal email address?
Answer
easy to gv comments... do something n post question &
answer..!!!
| Is This Answer Correct ? | 0 Yes | 0 No |
Question { 4291 }
What’s the default CDP holdtime in seconds for Cisco routers?
Answer
60 seconds with a hold time value of 180 seconds.
You can change the default configuration by these set of
commands:
Router # configure terminal
Router (config) # cdp timer 30
Router (config) # cdp hold time 90
Router # show cdp
You can configure the CDP timer value from 5 to 254 seconds
and CDP hold time value from 10 to 255 seconds.
| Is This Answer Correct ? | 10 Yes | 0 No |
What are the difference between IPv4 & IPv6?? Can anyone
explain more details about it..!!
Answer
try to explain...
some of them are..
a. IPv4 is a 32 bit addressing scheme in a TCP/IP network
where as IPv6 is a 128 bits address.
b. Address available in IPv4 is near about 4.3 billion
(including private, public & reserve) where as in IPv6 its
2^128.... (Calculate it... i don't hv guts....heheheh)
c. Complicated header in IPv4 where as IPv6 has most
simplied header (Extension field in header is optional in
IPv6 & Also some one fields are removed).
d. In Ipv4, IPSec & AH (Authentication Header)is add ons
(Not present default), where as in IPv6 IPSec & AH is
present default.
e. IN IPv4, there in no inbuilt QoS, but in IPv6, its inbuilt.
f. Stateless auto configuration is not supported by IPv4,
where as IPv6 support it. (New fatured introduced in IPv6).
g. In IPv4 network, packet fragmentation is done by router
or layer 3 device... where as in IPv6 network, packet
fragmentation is done by source node. so it reduce the
router overhead.
h. In IPv4, ip addressing styles are unicast, multicast &
broadcast, where as in IPv6 instaed of braodcast, its
introduce a new style its known as ANYCAST. (Same address
for group of devices, but packet wud be sent to nearest
device). So in IPv6 we can hv n number of server of the same
address.
i. In IPv4, ARP is used to track IP to MAC, where as in
IPv6, NDP (Neighbor Discovery protocol) is used for this
purpose.
Hey guys, Watever i know i just wrote it here... may be i m
wrong in some concept, let me know...... coz i m still
reading abt IPv6 & i think i hv to read more abt it...!!!
Coz after all we gonna use it very soon.
| Is This Answer Correct ? | 30 Yes | 1 No |
Question { 6813 }
Can anyone explain in details the STP port state?????
Answer
are fixed... ya for example u took..!!!! dats the point got
confused..!!!!
| Is This Answer Correct ? | 0 Yes | 0 No |
Question { 5495 }
how many default route can be configure on a router
Answer
Routing protocol.
It will be a matter of concern when we are going for load
balancing process.
So dude, will u explain hw can we config on;y 16 route... I
am gonna paste of my router config where 30 default routes
configured so far...
ip route 0.0.0.0 0.0.0.0 1.1.1.1
ip route 0.0.0.0 0.0.0.0 1.1.1.2
ip route 0.0.0.0 0.0.0.0 1.1.1.3
ip route 0.0.0.0 0.0.0.0 1.1.1.4
ip route 0.0.0.0 0.0.0.0 1.1.1.5
ip route 0.0.0.0 0.0.0.0 1.1.1.6
ip route 0.0.0.0 0.0.0.0 1.1.1.7
ip route 0.0.0.0 0.0.0.0 1.1.1.8
ip route 0.0.0.0 0.0.0.0 1.1.1.9
ip route 0.0.0.0 0.0.0.0 1.1.1.10
ip route 0.0.0.0 0.0.0.0 1.1.1.11
ip route 0.0.0.0 0.0.0.0 1.1.1.12
ip route 0.0.0.0 0.0.0.0 1.1.1.13
ip route 0.0.0.0 0.0.0.0 1.1.1.14
ip route 0.0.0.0 0.0.0.0 1.1.1.15
ip route 0.0.0.0 0.0.0.0 1.1.1.16
ip route 0.0.0.0 0.0.0.0 1.1.1.17
ip route 0.0.0.0 0.0.0.0 1.1.1.18
ip route 0.0.0.0 0.0.0.0 1.1.1.19
ip route 0.0.0.0 0.0.0.0 1.1.1.20
ip route 0.0.0.0 0.0.0.0 1.1.1.21
ip route 0.0.0.0 0.0.0.0 1.1.1.22
ip route 0.0.0.0 0.0.0.0 1.1.1.23
ip route 0.0.0.0 0.0.0.0 1.1.1.24
ip route 0.0.0.0 0.0.0.0 1.1.1.25
ip route 0.0.0.0 0.0.0.0 1.1.1.26
ip route 0.0.0.0 0.0.0.0 1.1.1.27
ip route 0.0.0.0 0.0.0.0 1.1.1.28
ip route 0.0.0.0 0.0.0.0 1.1.1.29
ip route 0.0.0.0 0.0.0.0 1.1.1.30
| Is This Answer Correct ? | 1 Yes | 1 No |
what is the default ad value of the interface directly
coneted to router.
as for exmaple ad value of ospf is 90 then from ehternet
the network is conected whta is difault value of that
directly conected interface.
what is the defalt ad value of bgp
whta is access llist and how many type of access list
what is vlan
what is vpn
how e congigure the router
what is mpls
these are the question skrd to me at tcs i have replyed all
ecxept the first one
Answer
b. AD value of BGP is
Internal BGP (IBGP) - 200
External BGP (EBGP) - 20
c. Access-list is a set of rules which allow/deny flow of
traffic moving through the routers.
or else we can say, ACL is method of making a router as a
packet filtering firewall.
- It is layer 3 security which control flow of traffic.
- It doesn't filter the traffic originated by router itself.
- Generally ACL is implemented in distribution layer router.
- It is created on gobal configuration mode.
In terms of identification, ACL are of two types -
a. Name ACL.
b. Number ACL.
In terms of traffic filtering, ACL are of two types -
a. Standard ACL.
b. Extended ACL.
d. The process of building a logical topology over a
physical network for the purpose of performance, security &
efficient use of bandwidth.
Rest of question, i'll answer next time....!!!
| Is This Answer Correct ? | 7 Yes | 0 No |
What is BGP attribute & How many types of attributes are
used by BGP???
Answer
characteristics of a BGP paths. Attributes are conatained in
update messages passed between BGP peers for advertise routers.
BGP attributes are broadly divided into two types -
a) Well Known
b) Optional.
Well Known attributes are divided into two types -
a) Mandatory
b) Descretionary
** Mandatory attributes are divided into three types -
a) AS Path
b) Next Hop
c) Origin
** Origin attributes divided into three types -
a) Internal(i)
b) External(e)
c) Incomplete(?)
** Descretionary attributes are divided into two types -
a) Local Preference
b) Atomic Aggregate
Optional attributes are divided into two types -
a) Transitive
b) Non Transitive
** Transitive attributes are divided into two types -
a) Aggregator
b) Community
** Community attributes are divided into for types -
a) No-export
b) No advertise
c) Internet
d) Local AS.
&& Non transitive attributes are divided into three types -
a) MED (Multi Exit Discriminator).
b) Originator
d) Cluster ID.
I'll explain all attributes on next post..!!!
| Is This Answer Correct ? | 79 Yes | 9 No |
What is BGP attribute & How many types of attributes are
used by BGP???
Answer
one by one -
Well Known:
Well known attributes are must be recognized by
each compliant of BGP implementations. Well known attributes
are propagated to other neighbors also.
Optional:
Optional attributes are recognized by some
implementation of BGP & expected that not recognized by
everyone. Optional attributes are propagated to their
neighbors based on the meanings.
Mandatory:
Mandatory is BGP well known attributes. Mandatory
attributes are must be present in all update message passed
between BGP peers. It is present in route description.
Discretionary:
Discretionary is BGP well known attributes.
Discretionary attributes are may be present on update message.
AS Path:
AS path is BGP well known mandatory attributes. AS
path defines the list of Autonomous System that a route has
passed through. AS path attributes are used in path
selection process & lowest path attributes will be preferred
over highest one.
Next-Hop:
Next hop is BGP well known mandatory attributes. In
BGP, next hop is the IP address which is used to reach the
advertising BGP router.
For EBGP, next hop is the ip address of the connection
between the peers.
For IBGP, EBGP next hop address is carried into local
autonomous system.
Origin:
Origin is BGP well known mandatory attributes.
Origion attributes define how BGP router learned about the
particular route. Origin attribute have three possible
values i.e. internal (i), External (e) & Incomplete (?).
Internal(i):
BGP learned about the route from Interior
routing protocol.
External(e):
BGP learned about the router from External BGP.
Incomplete(?):
The origin of the route is unknown or learned by
some other way. The origin of incomplete occurs when routes
are redistributed into BGP.
NB:
1. Due to lack of time, rest of attributes I'll discuss on
next post.
2. Its little bit difficult to draw diagram here & explain
each & every attributes.
3. If anyone need more about this, mail me on
mr.shahin07@gmail.com
Thanks & enjoys the weekend party tonight.... hehehe
| Is This Answer Correct ? | 62 Yes | 8 No |
