what happens if number of poles in stator and rotor windins of slip ring induction motor are not same. Will it rotate near to the synchronus speed defined by stator?
GATE,
1 Electrical Engineering 3885If the rotor pf of a 3 phase induction motor is .866, then what is the phase displacement between stator and rotor magnetic field 1)30,2)120,3)150,4)90 please justify....
GATE,
2 Electrical Engineering 4756If the Brsh of DC motor is shifted by 90 deg, then MNA will shift by --degree.
GATE,
5 Electrical Engineering 9892A separately excited dc motor having 2 ohm armature resistsance draws a current of 10A and torque developed is 20 Nm under rated field condtion. the speed of the motor under the rated field condtion , when it is connected to a 100V DC source and delivering 10Nm torque....
DRDO,
2 Electrical Engineering 4452Pure inductive ckt takes power from AC when 1. Applied voltage and Current increases 2. applied voltage and current decreses 3. voltage decreases and current decreases please justify
2 Electrical Engineering 3717Equal resistance of 100ohm each are connected to the arms of whestons bridge, which is supplied by 2v battery. The galvanometer can sense a current low as 1microAmp. What is the smallest resistance that can be measered.
GATE,
1 Electrical Engineering 3572Why LVDT have secondary windings connected in differential 1. Higher out put 2. Based on the out put voltage-/+, helps to identify the direction of displacement 3. To establish a null/ reference point
1 Electrical Engineering 5225the resstance of a thermistor is 5000 ohm at 25degreeC and coefficient is .04/degCel. A measurement with lead resitance of 10 ohm will cause an error of
GATE,
1 Electrical Engineering 3077voltage of a ckt is measured by volt meter having an input impedence camparable with the out put impedance of the ckt Eror caused is 1. Gross Error 2. Errors due to lloading effect
GATE,
2 Electrical Engineering 3226when the control mechanism is present for an ammeter(1-10A) and 1A current is apllied what will be the reading of the meter?
GATE,
2 Electrical Engineering 3595The error in a single phase energy meter where pressure coil lags behind applied voltage by 88 degrees and pf is 1) upf 2).5lag
GATE,
1 Electrical Engineering 3911The Q-facr o of a coil given as wL/R. what will be shape of Q versus frequency graph.
GATE,
Electrical Engineering 1535