MICROBIOLOGICAL ENGINEERING - QUESTION 28.3 : In the calculation of the growth of bacteria, absorbance, A in spectrophotometry is used. According to Beer-Lambert Law, A = e x l x c where A is the absorbance of the solution (no unit), l is the distance of light travels through the solution (in cm), e is the molar absorptivity or the molar extinction coefficient [ in L / (mol.cm) ]. For a particular solute and fixed path length : As / Ao = Cs / Co where Ao is the observed signal for a known concentration Co, and As is the observed signal for a sample concentration Cs. (a) For a cell concentration of 560 cells / mL, a spectrophotometre gives an absorbance reading of 1.0. A mixture of concentration 3600000 cells / mL can be diluted in several operations, with each operation having a dilution of 1:20. How many dilutions should be made so that the concentration of this mixture can be calculated within a range of A = 0.0 to 1.0. (b) In another experiment, a sample tube of 1 cm in width is used. Let A = 0.06 and e = 0.0012 ml / (cell.cm). Find the cell concentration of the sample.

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.1 : In the application of Theory of Spectrometry in spectrophotometer, let n = N x C x V, V = A x t, e = a x N where n = number of molecules, N = Avogadro's number, V = volume of cuvette, A = area of cuvette, t = thickness of cuvette, C = concentration of fluid in the cuvette, e = extinction coefficient, a = effective area of molecule. (a) By using calculus in dI = -I x a x N x C x dt, prove that ln (I / Io) = -a x N x C x t, where dI is the small difference in I and dt is the small difference in t. I = intensity of light. Io = initial intensity of light. (b) Show by calculations that ln (Io / I) = e x C x t based on the answer in the previous question (a). (c) Find the equation of log (Io / I) as a function of e, C and t based on the answer in the previous question (b).

May I know how much values to be set for earth fault, over current and short circuit values at 11kv side? I have 11kv van 1250amps rating. Present it's taking load 80amps?

My firm got Rs.1,00,000/- as consultancy charge after deducting Rs.10,000/- as TDS. Now we have to pay Rs.15,000/- as Service Tax. Net effect we will receive only Rs.75,000/-. How can i account this.

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.6 : In infrared spectrum, one of the factors affecting peak location is the mass of the atoms. The stretching frequency of a bond connected to a lighter atom will be greater than the same bond connected to a heavier atom. (a) For halogens like florine (F), chlorine (Cl), bromine (Br), iodine (I) and astatine (At), what is their IUPAC group number? Hint : The proton numbers for F, Cl, Br, I and At are 9, 17, 35, 53 and 85 respectively. (b) For the compounds of H-F, H-Cl, H-Br, H-I and H-At, which one has the lowest stretching frequency and which one has the highest stretching frequency? State the reasons.

What do you mean by GTT? What are the effect of GTT on film coating.

ENGINEERING PHYSICS - EXAMPLE 30.2 : The Planck-Einstein relation connects the particulate photon energy E with its associated wave frequency f to produce E = hf. Let h to be the Planck constant. The frequency f, wavelength L and speed of light c are related by E = hc / L. With p denoting the linear momentum of a particle, the de Broglie wavelength L of the particle is given by L = h / p. (a) Find the equation of E as a function of p and c. (b) If E has a unit of electron-volt and f has a unit of 1 / second, then what is the unit of h?

Does VDF add strength to the flooring apart from preventing water ingress?

how to calculate steel for slab or footings?

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.6 : In N + 1 Rule in Quantum Chemistry, whenever a spin 1 / 2 nucleus is adjacent to N other nuclei, it is split into N + 1 distinct peaks. In 1 peak or singlet, there is only 1 magnitude. In 2 peaks or doublet, the ratio of magnitude of each peak is 1 : 1. In 3 peaks or triplet, the ratio of magnitude of each peak is 1 : 2 : 1. In 4 peaks or quartet, the ratio of magnitude of each peak is 1 : 3 : 3 : 1. In 5 peaks or quintet, the ratio of magnitude of each peak is 1 : 4 : 6 : 4 : 1. (a) By using binomial coefficients or Triangle of Pascal find the ratio of magnitude of each peak if 6 peaks exists. (b) How many adjacent nuclei are available in a spin 1 / 2 nucleus in such situation of 6 peaks?

How to find beam R/F cutting length

Question 112 - In quantum computing, let the amplitude A = a | 0 > + b | 1 >, | a | | a | + | b | | b | = 1. Find the values of b if A = 0.8 | 0 > + b | 1 >.

Who did paint the famous painting Guernica?

eBay,

Who painted the ceiling of the Sistine Chapel?

eBay,

QUANTUM COMPUTING - EXAMPLE 32.1 : In quantum computing, let the amplitude A = a | 0 > + b | 1 >, | a | | a | + | b | | b | = 1. Find the values of b if A = 0.8 | 0 > + b | 1 >.