Interested to Buy Any Domain ? << Click Here >> for more details...
There are two buildings one taller and one shorter whose time period will be grater and similarly the frequency ?
1722Define What is the difference between routing maintenance and major maintenance in school facilities?
1278Post New Civil Engineering Questions
In foundation design, while we do the base pressure check, we normally check if the attained pressure value is less than the GROSS BEARING CAPACITY of the soil which is the sum of net bearing capacity of soil and the overburden pressure. Actually, the overburden pressure acts against the net bearing capacity of the soil and I feel that we are actually increasing the bearing capacity value and doing the check. I feel that this is NOT right. Please clarify on this.
What is the strength of 1:6:12 mix?
A rock anchor 3 1/2” in diameter is placed in rock. The which has an allowable shear strength of 1200 psi. Determine the required anchorage length to safely carry a 80 ton load using a 2.0:1 F.S
If we don't have drawing for Excavation of building,At what rule we will go for excavation and how much depth will go for a villa?
How to find out kg per Sft ?
How much quantity of cement and sand required for the inlining of 610mm dia MS pipe 8.7mm thk.Inlining thickness is 10mm and CM ratio is 1:1.5.
What is the difference between yeild strength and compressive strength of steel???
how i can tak Quantity of mortar in block work
how to absorb to site basic corrections? which are the important correction?
What happens to Load at yielding ?
Stringer How many cm goes to landind
How is the strength of cement measured?
In a beam,stirrups are placed closely at ends than at centre due to shear.similarly where would ties be closer to each other-at center or at ends in a column and slab.
Why joints are provided?
Explain what is the release of lien?
