Follow Our FB Page << >> for Daily Laughter. We Post Funny, Viral, Comedy Videos, Memes, Vines...

Company Name Starts with ...
#  A  B  C  D  E   F  G  H  I  J   K  L  M  N  O   P  Q  R  S  T   U  V  W  X  Y  Z

AT&T Interview Questions
Questions Answers Views Company eMail

The amount of light entering the eye is regulated by 1 Cornea 2 Pupil 3 Iris 4 Sclera

1 8463

take a pen and copy before solving that question there is a router name Ra there is two switch sw1 and sw2 sw1 is coneceted through fa0/1 interface of router Ra sw2 is conected through the fa1/1 serai interface of router s0/1 conected through the isp with it ip address now therer are three host conexted through the sw1 and having ip host1= host2= host3= now there is also 3ree host conected through switch 2 i.e sw2 having ip host4= host 5= host 6= now i think u have made corect questios is started network admin configure the Ra router in that fassion Ra(config)#access-list 2 permit Ra(config)#line vty 0 4 ra(config)#access-class 2 in now question is that why should network admnistratoe do it in this maneer A to give access sw1 host to acess internet B to prevent sw1 host from acessing comand promt c to prevent sw2 host from accessing console of router ra D to give sw2 host access to the enternet e prevent sw1 host from accessing internet f to prevent sw1 host from acessing the sw2 host network isp------(s0/1)..RA..(fa1/1)---SW2-host (4,5,6) | | (sw1)------host 1,2,3 this is not exect digarm but help to derive the diagram plz answer as soon as possible

6 5009

what is the difference between db01 locks and sm12 locks?

3 19669

what are the pros and cons of auto extend of table spaces?


I've performed table space adjustment while doing a client copy in production i need to do that table space adjustment in my disaster recovery system as well?

2 5904

routing 1. Difference between RIPv1 and RIPv2? 2. How many number of routes carried by RIP packet? 3. Is OSPF link state or distance vector or path vector protocol? 4. What is the difference between OSPF and IS-IS and which one is preferred? 5. Can we use BGP instead of any IGP? 6. How many network types available in OSPF? 7. Different type of Link State Advertisements aka LSA? 8. LSA 3 and LSA 4 are generated by which router? 9. When to use Stub and Not So Stubby Area? 10. How to get the external routes without making area Not So Stubby? 11. What is the different type of route summarization available in OSPF? 12. What is the requirement of doing summarization? 13. A major network is advertised as summary in one area and few of the routes from that network is configured in another area. What will happen in that case? 14. If any of the OSPF area is not stabilized, does it impact another area? 15. What is the use of forwarding address in LSA 5 and LSA 7? 16. External routes are available in OSPF database but not installing in routing table? 17. If loopback is not configured, what will be the router- id selected by OSPF process? 18. Can we run multiple OSPF process in single router and what is the advantage of using it? 19. What are timers of OSPF? 20. Multicast address of used by OSPF. 21. OSPF works on which layer? 22. What is backbone area in OSPF? 23. Can we use OSPF without backbone area? 24. Is it required that OSPF router-id must reachable in IGP cloud? 25. After configuring new router-id, automatically it will be used or do we need to use some type of command to get it operational. 26. Why the secondary ip address of interface is not advertising in IGP cloud? 27. OSPF neighbourship is not coming up. Please tell the various steps to troubleshoot it. 28. One side MTU is 1500 and another side MTU is 1600. Does it affect neighbourship? 29. Provide process of DR and BDR election. 30. If DR is down and no BDR is configured what will happen? 31. What is the difference between a neighbor and adjacent neighbor? 32. My OSPF neighbourship is showing 2-way, what does it mean? 33. Define different type of OSPF neighbor states? 34. OSPF external routes are not redistributing? switching 1. Difference between hub, bridge and switch? 2. What is mac address and why it is required? 3. In layer 2 domain do we need ip address for communication? 4. What is arp and why it is required? 5. What is Spanning Tree Protocol aka STP? 6. What is the difference between STP, MSTP, PVST and RSTP? 7. Can we use the two same paths for same vlan? 8. What is the difference between broadcast and collision domain? 9. Define type of lan traffic. 10. What is destination address of broadcast frame? 11. Can we connect a switch to switch with straight cable? 12. Define functions of switch. 13. What is arp timeout? 14. What is aging process? 15. What is BPDU? 16. What is path cost? 17. Define selection criteria of STP root bridge. 18. How to non bridge decide which port will elect as root port? 19. If a nonroot bridge has two redundant ports with the same root path cost, how does the bridge choose which port will be the root port? 20. Port states of spanning tree protocol. 21. If the users face delay during initial login, what you will suggest to implement? 22. Why spanning tree BPDU filter is used? 23. Can I use BPDU filter on trunk ports? 24. What is port security? 25. I want to learn only a single mac from the port, what need to be configured? 26. Can we use spanning port-fast on trunk ports? 27. If management ip address is changed, will user’s traffic will be dropped? 28. Difference between trunk and access port? 29. What is UDLD and why it is required? 30. What is interface vlan on switch? bgp 1. BGP is IGP or EGP? 2. BGP is link state or distance vector protocol? 3. BGP uses which port? 4. When to use BGP? 5. Can I use BGP instead of any IGP? 6. Can I run two BGP process on single router? 7. What is Autonomous System? 8. Types of BGP routing table? 9. What is the BGP path selection criteria? 10. Define various BGP path attributes. 11. Why weight doesn’t fall under path attribute category? 12. What is confederation? 13. What is route reflector and why it is required? 14. What is no-synchronization rule? 15. Default BGP timers. 16. When does BGP use router id? 17. Does route reflector come in actual path during traffic forwarding? 18. What is Site of origin aka SOO? 19. What is the cost of external and internal BGP routes? 20. Can we use local preference outside the autonomous system? 21. Does it require that BGP router-id should reachable in cloud? 22. What is recursive lookup in BGP and how it works? 23. What is the meaning of update source loopback? 24. If a static route is advertised in BGP without using update source what will be the next hop address in update? 25. Define various types of communities and why they are used? 26. If BGP neighbor state is showing idle what does it mean? 27. In Multihoming scenario if primary link gets fail, after how long traffic will be shifted to secondary link. 28. I am having two routes for remote destination but only single route is installing in routing table, what’s the reason for this? 29. How many links can be assigned for load balancing or sharing? 30. In eBGP I am establishing my neighbourship with loopback address but it’s not coming up. Please specify different reasons for not coming up. 31. Can we redistribute BGP in IGP? Please explain your answers. 32. What is cluster id? 33. I am receiving updates from eBGP peer, will the next hop change or not? 34. I am receiving updates from iBGP peer, will the next hop change or not? 35. A router is receiving same route from two different eBGP peers. The AS information contains in peer 1 is {65500, 65550, 65555} and in peer 2 is {65501, 65501}. But I want to make peer 1 preferred. 36. What is the difference between next-hop-self and update source loopback? 37. Define loop prevention mechanism in BGP. mpls and vpn 1. What is the difference between VPN and MPLS? 2. What is MPLS and why it is being so popular in short time? 3. What is the protocol used by MPLS? 4. MPLS works on which layer? 5. What is the difference between P and PE router? 6. Can I make my PE router as P? 7. Two routers are having 4 equal cost links, how many ldp sessions will be established? 8. My LDP router id, OSPF router id and BGP router id is different, will it work to forward the traffic of customers or not? 9. What is Penultimate Hop Popping and why it is required? Which router performs the PHP function? 10. I am receiving aggregate label, what does it mean? 11. What are the different types of labels? 12. How to make customer route unique? 13. What is the difference between RD and RT? 14. Can I assign a same RD to two different customers? 15. Is RD travels in route update? 16. My customer is having three branches and all are attached to three different PEs, In this case can I use the different vrf names? 17. What is downstream on demand? 18. How to filter MPLS labels? 19. What is the default range of MPLS labels in Cisco routers ? How to extend that range? 20. Without route reflector can I implement MPLS? 21. What is the difference between VPNv4 and IPv4 address family? 22. What is MP-iBGP? Can we use normal BGP in lieu of MP- iBGP? 23. What is LIB, LFIB? 24. What is CEF and without enabling CEF, can we make MPLS work? 25. I am receiving end to end customer routes on various PE but not able to ping those routes, what’s could be the problem? 26. What is explicit null and implicit null? 27. Default timers of LDP? 28. Does LDP require OSPF, IS-IS or BGP? 29. In neighbor discovery command, I am receiving only xmit, what does it mean? 30. What is transport address? 31. What is the RFC of MPLS? 32. Why MPLS is called multi protocol? 33. What is the difference between MPLS, SSL and IPSec? 34. I am using different vendor products and want to implement TDP, what type of challenges will you face? 35. Does MPLS support IPv6? 36. Can I use the existing IPv4 MPLS backbone for IPv6? 37. Define various troubleshooting commands in MPLS? 38. What is forward equivalence class aka FEC? 39. What is adjacency table? 40. Difference between MPLS IP and MPLS Label Protocol LDP command? 41. If MPLS get disable, will it harm my IGP or IPv4 traffic?

9 17907

Post New AT&T Interview Questions

Un-Answered Questions

What are the options in sap for fiscal years?


A join logical file has how many record formats?


What is a repository? And how to add it in an informatica client?


Name any four colours of summer.


What is method overloading and method overriding?


Tell me what is https/ssl update?


A company charity (gross income


What are security groups?


What is the use of @bean annotation in spring?


What does grep v grep do?


Mention what is the primary use of the category in the objective-c?


What is unbounded queue?


Explain the deployment models?


What is Coupling?


What are the dynpro components?