When configuring a router utilizing both physical and logical interfaces, what factor must be considered in determining the OSPF router ID?

0 Answers  

---

Identify 3 characteristics of IP RIP? A.) Distance vector B.) Administrative distance is 120 C.) Periodic updates every 60 seconds D.) Uses a composite metric E.) Can load balance

1 Answers  

---

Which OSI layer provides best effort end to end packet delivery? A.) Data-Link B.) Presentation C.) Network D.) Transport E.) Physical F.) Application

2 Answers  

---

On a network design project you determine that a new testing application requires multiple hosts. These hosts must be capable of sharing data between each host and an enterprise server at 10 Mobs bandwidth. Other divisions in the company use applications that require less than 2 Mobs bandwidth of the enterprise server. What is your most economical recommendation? A. That existing 10BaseT hubs be replaced with 1 00BaseT hubs to improve overall performance B. That a router can separate the testing application from the rest of the network, thus allowing the testing application more bandwidth. C. That a switch be installed, so that the enterprise server can be provided a 100 Mobs pod and each of the testing application hosts can be given dedicated 10 Mobs pods] D. That a bridge be placed between the enterprise server and all other users with the exception of the testing application

1 Answers  

---

What is the difference between communication and transmission?

0 Answers  

---

Write an access list line which will deny node 20.0.2.1 to anywhere on your network using DNS via UDP. Don't worry about the other access list lines.

2 Answers  

---

Identify the statement which connects access-list 101 inbound to interface e0? A.) Router(config-if)# ip access-group 101 in B.) Router(config-if)# ip access-group 101 C.) Router(config)# ip access-group 101 e0 in D.) Router(config)# ip access-group 101 e0 in

1 Answers  

---

What does the 'S' mean when looking at the routing table? A.) Statically connected B.) Directly connected C.) Dynamically attached D.) Shutdown route

1 Answers  

---

Which of the following is an example of the Network Layer? A.) TCP B.) IP C.) SQL D.) Token Ring E.) LLC

2 Answers  

---

You are given the IP address of 172.16.2.160 with a subnet mask of 255.255.0.0. What is the network address in binary? A. 10101100 00010000 B. 00000010 10100000 C. 10101100 00000000 D. 11100000 11110000

2 Answers  

---

What are two purposes for segmenting a network with a bridge? (Choose two) A. to reduce collisions B. to increase collisions C. to add collision domains D. to reduce collision domains E. to have more broadcast domains

3 Answers   Ecobank, RNP,

---

Cisco routers use wildcard masking to identify how to check or ignore corresponding IP address bits. What does setting a wildcard mask bit to 0 cause the router to do? A. It tells the router to check the corresponding bit value. B. It tells the router to ignore the corresponding bit value. C. It tells the router to check its alternate routing list. D. It tells the router to use its primary routing list.

2 Answers  

---