Explain the purpose of ip address? And also Give the brief
description about Class A,Class B and Class c?
- 6 Answers
- 17519 Views
- HCL, I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / karthikaayyappan
IP addresses are 32 bit long and are used in the source
and destination address fields of IP packets.The purpose
of the IP address is that not only identifying the
individual devices but also to identify the host to the
network.
Class A: If the first bit of IP address is 0,it is the
address of class A.The next 7 bits identify the network and
the last 24 bits identify the host.There are fewer than 128
class A network numbers, but each class A network can be
composed of millions of hosts.
Class B: If the first 2 bits of IP address is 1 0,it is
the address of class B.The next 14 bits identify the
network and the last 16 bits identify the host.There are
thousands of class B network numbers and each class B
network can be composed of thousands of hosts.
Class C: If the first 3 bits of IP address is 1 1 0,it is
the address of class C.The next 21 bits identify the
network and the last 8 bits identify the host.There are
millions of class C network numbers and each class C
network can be composed of fewer than 254 hosts.
| Is This Answer Correct ? | 43 Yes | 6 No |
Answer / dhirendra kumar
IP addres is a software base address.It is used for
identify a host in a network.In local area network each
computer has uniq IP address To send and receive data
through it. There are basically five classes IP addresses.
1.ClassA
2. classB
3. classC
4.classD
E.ClassE
Where classD is used for multicasting And classE is
reserved for Research Purpose
ClassA IP host ID can be 1to 126.
ClassB IP host ID can be 128 to 191.
ClassC IP host ID can be 192to 223.
| Is This Answer Correct ? | 38 Yes | 8 No |
Answer / shivananda
the logical address of an computerand is known as ip
address ,it is used for the identify computer in a network .
there are five classes ip address there
class A
class B
class C
class D
class E
| Is This Answer Correct ? | 11 Yes | 4 No |
Answer / suman
PURPOSE OF IP :-
1) Unique Identification of:
Source, Sometimes used for security or policy-based
filtering of data
Destination, So the networks know where to send the data
2) Network Independent Format:
| Is This Answer Correct ? | 6 Yes | 6 No |
Answer / karishmadissanayaka
IP addres is a software base address.It is used for
identify a host in a network.In local area network each
computer has uniq IP address To send and receive data
through it. There are basically five classes IP addresses.
1.ClassA
2. classB
3. classC
4.classD
E.ClassE
Where classD is used for multicasting And classE is
reserved for Research Purpose
ClassA IP host ID can be 1to 126.
ClassB IP host ID can be 128 to 191.
ClassC IP host ID can be 192to 223.
| Is This Answer Correct ? | 0 Yes | 0 No |
Answer / vinay
An IP address is an Internet Protocol address. It is used to
identify all the websites on the internet. Each IP address
is unique and it is separated by periods. For example :
124.2.3.5 . It ranges from 0 to 255. Each and every website
have an IP address. For example, an IP address for
Google.com is 216.239.59.147 and that is how the internet
identifies it. Generally, ip address is very difficult to
remember by the visitors. So, they type domain name (
google.com/yahoo.com etc ) in the browser and it is
converted to the destination address . This conversion
process is done by DNS ( Domain name system / Domain Name
Server ). There are two types of ip addresses:
1. Private Ip address
2. Public Ip address
Private ip address is also known as internal ip of your
computer. To get the ip address of a computer use the
following steps:
start->run->cmd-> ipconfig
or
start->run->cmd->ipconfig/all It shows your internal ip
address. Public or external ip address is used to access the
internet. Private ip address range is as follows :
Class A(Netid.hostid.hostid.hostid) : 1.0.0.0 to 126.0.0.0
Class B(Netid.Netid.hostid.hostid) : 128.0.0.0 to 191.0.0.0
Class C(Netid.Netid.Netid.hostid) : 192.0.0.0 to 223.0.0.0
Class D(Multicast) : 224.0.0.0 to 239.0.0.0
Class E(For Research) : 240.0.0.0 to 255.0.0.0
Public ip address ranges from :
Class A(Netid.hostid.hostid.hostid) : 1.0.0.0 to 126.0.0.0
Class B(Netid.Netid.hostid.hostid) : 128.0.0.0 to 191.0.0.0
Class C(Netid.Netid.Netid.hostid) : 192.0.0.0 to 223.0.0.0
Class D(Multicast) : 224.0.0.0 to 239.0.0.0
Class E(For Research) : 240.0.0.0 to 255.0.0.0 To determine
public ip address visit http://www.ip-details.com/ .
| Is This Answer Correct ? | 0 Yes | 1 No |
If all stations tries to communicate at same time, what will happen ?
What?s a VLAN?
What is HTTP and can you list few protocols with explanations?
What are the uses of protocols?
What happens at every layer of the OSI model when we type "www.google.com" in the browser? This should typically explain everything from a networking point of view at layers 2,3 and 4.
1 Answers Accenture, Global Logic, HCL,
what is the ethernet interface?where and when we can use? how to connect hte host systems to target system
What are the generally asked questions for a Person who is attending Network protocol testing L2/L3.
0 Answers DLI, IT Labs, Tech Mahindra,
Suppose in DHCP server running network(assigning ip addresses automatically), you connect a Laptop in the same n/w, now how the DHCP is going to assign a IP add. to it and how it will came to know that there's one new machine added.
13 Answers Cisco, CybAge, Mphasis, Targus Technologies, Zensoft,
• Brief me about yourself? • What are your day to day job roles /responsibilities? • What is the through put of 3560 POE switch? • What is POE switch? • How will you configure VLAN in a new switch? • What is NAT? • Different types of NAT? • Difference between NAT & PAT? • Explain with diagram how you can access a PC on internet; will NAT come into picture, how? • How many physical ports are there in PIX 515E? Are they Ethernet of gigabyte? • What is difference between ASA5510 & ASA5550?How many ports are there • Explain any client network topology? • How will you configure a new firewall, parameters for configuration? • What is HSRP? • If a link is down what status will be the interface be in? • How good are you in SWITCHING ,rate yourself between 1 to 5 • What is VLAN • Avaya IP Phone, separate required? • Configuration for DATA and VOICE VLAN? • What is VTP? • Modes of VTP • Can we have more than 2 VTP servers in a single VTP domain? • What is STP? • How STP works? • How is Root Bridge elected? • Which priority is considered, highest or lowest? • Difference between STP & RSTP? • Modes of STP? • By default which mode of STP is there? • By default which mode of VTP is there? • In firewall which security level is what? • What is DMZ? • What is ether channel?
explain the test bed which is used to test VOIP SIP products?
WHAT IS PEER TO PEER NETWORK
What does ftp stand for?
SNMP 
