Does a bridge divide a network into smaller segments?


No Answer is Posted For this Question
Be the First to Post Answer

Post New Answer

More CCNA Interview Questions

Which protocol can do load balancing on unequal cost also?

0 Answers  


Which of the following describe SMTP? A.) Used for downloading files to the router. B.) Used for sending e-mail. C.) Uses TCP. D.) Uses UDP. E.) Uses port 25. F.) Used for managing IP devices.

1 Answers  


Can you explain PAP?

0 Answers   CCIE,


What is the checksum?

0 Answers  


What is public and private ip address., explain? and also explain the ip address range of both public and private? and where we use that public and private ip address?

13 Answers  






hi... i am usin packet tracer 5.0.. i hav connect two routers A and B. A has 200.100.25.100 and 1.0.0.1 and router B has 200.100.50.100 and 1.0.0.2... i hav connected 1.0.0.1 and 1.0.0.2... now i want to route 200.100.25.100 and 200.10.50.100 usin rip.. i enable rip in both the routers... but whn i give the command show ip route... i jus get this Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set A# so can sombody tell me where i hav gone wrong... thanku

4 Answers  


Hi, Shahin Thanks a lot for providing me these sites. These links are really helpful for me. r u working somewhere please let me know

1 Answers  


Identify the 4 that are not LAN technologies? A.) HDLC B.) FDDI C.) 802.5 D.) HSSI E.) SDLC F.) Frame Relay

1 Answers   AXA,


An optional parameter on an IPX access is the 'LOG' parameter. This records access-list violations when a packet matches. What else does the 'LOG' option do? A.) Records the number of times that a packet matches the list. B.) Return a message to user who is denied access the by list. C.) Notifies an SNMP Agent. D.) Saves the log to NVRAM. E.) Send an SNMP Trap.

1 Answers  


Which 2 commands shows the Cisco IOS filename? A.) show IOS B.) show ver C.) show flash D.) show mem E.) show NVRAM

1 Answers  


Identify the command to configure the router to boot from an alternate IOS located in flash? A.) boot system flash IOS.exe B.) boot system tftp IOS.exe 172.16.5.1 C.) boot system alternate IOS.exe D.) boot system rom IOS.exe

1 Answers  


Which two encapsulation names are correctly paired with the Cisco IOS encapsulation names? (Choose two) A. Ethernet_II-ARPA B. Ethernet_802.3-SAP C. Ethernet_802.2-LLC D. Ethernet_SNAP-SNAP

1 Answers  


Categories