Interested to Buy Any Domain ? << Click Here >> for more details...
Which two statements about IP RIP are true? (Choose two)
A. It limits hop counts to 31
B. It is a link state routing protocol
C. It uses autonomous system numbers
D. It is capable of load sharing over multiple paths
E. It uses bandwidth as the metric for path selection
F. It broadcasts updates every 30 seconds by default
- 1 Answers
- 8568 Views
- I also Faced
- E-Mail Answers
Identify the command to configure the router to boot from an alternate IOS located in flash? A.) boot system flash IOS.exe B.) boot system tftp IOS.exe 172.16.5.1 C.) boot system alternate IOS.exe D.) boot system rom IOS.exe
How does a switch use store and forward? A.) By using a Class I repeater in a collision domain B.) The LAN switch copies the entire frame into its onboard buffers and then looks up the destination address in its forwarding, or switching, table and determines the outgoing interface C.) By using broadcast addresses as source addresses D.) The switch waits only for the header to be received before it checks the destination address and starts forwarding the packets
Which statement about the data link connection identifier (DLCI) is true? A. It is a number that identifies a local virtual circuit in a Frame Relay network B. It is a signaling standard between the CIDE device and the Frame Relay switch C. It is the clock speed (pod speed) of the connection (local loop) to the Frame Relay Cloud D. It is the Maximum number of uncommitted bits that the Frame Relay switch will attempt to transfer beyond the Committed Information Rate (CIP)
What is a back off on an 802.3 networks? A. It is latency in store and forward switching B. It is the time used for token passing from machine to machine C. It is the retransmission delay that is enforced when a collision occurs D. It is the result of two nodes transmitting at the same time. The frames from each transmitting device collide and are damaged
Given the following descriptions of layers of the OSI model 1) This layer segments and reassembles data into a data stream 2) This layer manages device addressing tracks the location of devices on the network and determines the best way to move data 3) This layer provides the physical transmission of the data and handles error notification network topology and flow control. Choose the statement that lists the layers in the order described above A. physical data link network B. physical session data link C. data link network transport D. data link transport network E. transport network data link F. transport data link network
What is difference between tcp/ip and osi model?
Which OSI layer supports the communication component of an application? A.) Data-Link B.) Physical C.) Session D.) Presentation E.) Application F.) Transport
What is the Broadcast IP Address?
What are the 2 functions of the Data Link Mac layer? A.) Handles access to shared media B.) Manages protocol access to the physical network medium C.) Provides SAPs for higher level protocols D.) Allows multiple devices to uniquely identify one another on the data link layer
what is the diffrence betwwen telnet and ssh.this question is asked by nikhil and i am plasing the answer here insteed of his personal mail.
Which of the following are examples of the Transport Layer? A.) SQL B.) UDP C.) IP D.) LLC E.) ARP
Difference between subnetting & Vlan??
CCNA 
