Which stone is best for wall construction Laterite Stone or Cement Blocks
The old welding machine use electro- -magnetic winding to step up the current for welding rods,what is new principle inside the welding
1.how to retrive corrupt file in back up ? 2.what post actives of patching 3.how increase the file size in unix
how to calculate maximum current
I want formula to calculate cable size as per load given in length & amp. I searched many sites but didn't right answer. Please reply me asap.
There are Two questions about Steam Turbine Generator... What is HRSG bypass of LP, HP used for in power generation? In particualar, in the event that fault of HP bypass, there would be STG TRIP in operation but none on the LP bypass fault...what's the reason ?
p*=(++q)++*--p when p=q=1 while(q<=6)
what is the difference between improving personal effenciency & improving problem solving in relation with mdss?
why Nacl solution called as brine solution?
Difference between Lugs and Thimbles
I currently use 17-7 PH stainless which is hardened to condition CH after forming. raw matl is .1.75"X .12" X .008". Its main usage after hardening is silicon wafer retainer where it's contantly cycled up and down to putin and remove wafer after 40-60 sec process at 400C temp. At this high temperature this part seemed to deform after a a couple of hundred wafer which is what it was designed for in the first place. THere is a proposal to go to a different material to increase lifeline of this part. My question is..... can 321 SST be a plugin replacement. I know this has a higher temp rating but how about its forming characteristics, will it have spring properties, and wont become brittle after prolonged exposure to 400C.
can we use trip light with bus coupler?
The answer to the above question is breaking the combinational circuit and pipelining it. What will be affected if you do this?
If any HVDC line is going with positive & negative(the negative usually have return path of current with earthing electrode). Now the question is if this HVDC earthed electrode which is using as return path and earthed any nearby 400kv or 220kv AC substation equipments. which will be the impact of this on AC substation & its equipment, how severe may be this and what should be the minimum distance require between HVDC earthed electrode and AC substation equipments? It's really an high engineering level question...Dare to answer and increase your knowledge.
what is the diffeence between real time testing and GUI testing?