Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / chandan
inrush current means the starting current of a transformer or a motor.During starting, the inductive equipment draws huge current from its source.There is 2nd,3rd,4th and so on harmonics frequency currents are present with the fundamental frequency during the charging of the equipment.Specially ,2nd harmonic currents are predominantly present during the starting or charging of the equipment.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
why do we have spikes enough to burn electronic boards, when generators are not grounded
write circuit diagram for a motor rotate in forward direction once it started and when pressed the same button it should rotate in anticlockwise.
how much excitation voltage required to generate 1mw power?
Why the magneti fields are not passes from southpole to north pole
I have made a 3 phase thyristor full bridge rectifier. But at the moment it is working only for the half bridge operation. Both the half bridges are on operation separately but when i put it into full bridge operation the oscilloscope output is zero. I rechecked that the pulses are correct for each thyristor. what could be the possible reason for this?
What is the formula to calculate distribution transformer De-rating on iron losses basis
can we use ZNyn11 transformer instead of Dyn11 transformer in distribution for effectively eliminating harmonics from the industrial loads.
how give earthing conection to household equipment?
Please define ohm’s law for a.c (alternating current)?
how to convert lv line to hv line and viseversa, any losses will occur during this process
In our factory so many iron pillors are exists for supporting the shed/Hangar. If do more no of earthings at one piller instead of doing more earth pits in many locations and running earth strip around the hanger, I can save the money. Please suggest this method is acceptable as per Is specifications though the Earth resitance of the farthest piller is with in the limits as per IS specifications.
Mention how NPN and PNP transistor works?
Where I can get the sample question for post of Junior engineer electrical-II For RRB Bhubaneswar.
why magnetising curve not start with zero voltage?
what is the voltage between earth to neutral in lift.
