how to calculate the steel?

Answer Posted / rv

Area of Steel bar of dia "D"= (3.14 X D X D)/4

Is This Answer Correct ?    1 Yes 1 No



Post New Answer       View All Answers


Please Help Members By Posting Answers For Below Questions

manhole height is 1500 mm and width of brickwork is 230 mm dia of manhole covering is 560 mm brick masonry 1:4 horizontal length is 1500 mm and plaster 12 mm thick on both side 1:3. how to estimate the quantity of brickwork with mortar cement and sand for manhole chamber.

1650


what is the name of shuttering oil used in oman

2256


When was the first motorway built in england?

650


five benefits of using standard terminology in the measurement process

2858


For fine aggregate which is most suitable River sand or crusher sand & why ?

1324






What is the different type of slump test indications?

668


What is thumb rule in quantity and cost estimation of a residential building in civil engineering??

2577


What is difference between combin footing & rapt footing

1127


Any strength is a stress but any stress is not strength

1280


What is the use of water table & Kreb stone for drain

1367


What is rate for brick masonry work of 1.0 m3 in cm 1:6?

738


if mineral admixture add into concrete then what is the differences between full cement concrete & fly ash added concrete of their SP. Gr.?and for the changes of SP. Gr. what is the changes in concrete

1616


CAN WORK WELL UNDER DEAD LINES OR PRESSURE?

1494


A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals

1773


List out some of the common problems that architect have to tackle it?

634