my field of interest is T&D. plz tell something about that.
Answer Posted / praveen
transmission and distrubution:-
the lines which transmit power from generating station to
distrubution substaion is called transmission..
the lines which transmit power from these substation
consumers is called distrubution...
A very high voltage is transmitted to reduce losses...
The main thing we consider transmission or distrubution
is "SAG"calculation... sag of line directly propotional to
the weight of the conductor,distance between the poles etc..
Is This Answer Correct ? | 14 Yes | 0 No |
Post New Answer View All Answers
What is the HVDC Transmission System? What are the conditions applicable to lay an HVDC Line?
If breaker is undefined position, first step to do.
Thumb rule of cable size(rm>30 rm)X multiplying factor=ampere
Is any AC drive(VFD) had a feature of DC injection braking? if available please mention the detail. i.e drive can supply braking torque when the motor in idle state.
Which is the largest hydropower station in the world?
What is an iron loss or core loss pi?
What are the transformer losses?
can we choose current transformer secondary, to calculate residual flux in a power transformer, so as its saturation is close to the saturation level of power transformer?
what is rating boiler
What is the Surge suppresor? Why using in a UDB's and How it works?
why the carbon brushes are broken in srim while the motor runningtime
why impedance relay is used for medium transmission line protection
An ELHNC 80amp 240v 30mA RCD is tripping periodically, every 30 - 180 seconds is it safe to disconnect the protection circuit?
WHAT IS START TO INDUCTION MOTER IN STAR TO DELTA OF >5HP ?
temp of cast resin 1500kva tx formerwent up to 138.c but came down very fast to about 100.c within 20 mins when load was reduced from 70% to 60%