Can we pass 11kv power in 1.1kV voltage grade cable.If not why?.
- 3 Answers
- 9833 Views
- I also Faced
- E-Mail Answers
Answer Posted / lalit
its very clear question. the cable only bear 1.1 kv and you
are passing 11 kv. in case of 11 kv the insulation of cable
will burn.
| Is This Answer Correct ? | 5 Yes | 1 No |
Post New Answer View All Answers
what is RNG in the DG synchronizing by PLC?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
1)What is a Triode? What are its uses? 2) What is a Triac? 3) What is a Thyristor?
If a transformer primary winding operates at 240v, the secondary at 120v and the load is 1500w & the transformer is rated at 92% efficient, what's the current flowing through the primary winding of the transformer? What is the formula for finding this?
how does it help for selection of a transformer.
How to discuss the phase shift of transformer considering open delta?
how to find Harmonics and types as per the equipemnts
How to design the no. of ceiling fans required in 5mtr X 10 mtr X 3 Mtr hight room?
Why space heater is required for each verical bus bar chamber? if one space heater is adequate or not for anti condensation?
some basic standard questions on transformer.
WRITEDOWN FEW RELY CODES
how to decide choke rating for drive?
What is VCB? where it is installed at SP. What is SP?
why Induction Generators are not "Black start" ? and apart from WTGs where this types of generator are generally used?
Electrical Engineering
