WHY THE TRANSFORMER VALUE MEASURES IN KVA INSTEAD OF KW.
Answer Posted / k.prakashchandra
The current is proportional to KVA
Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
How we can calculate the consumption in kwh of motor on basis of kw @100% load, @50% load & @ no load.
What happens if we run alternator on under frequency?
what is magnetizing current test in power transformer
what is formula to cal cute earth pit numbers and size of earth strip used in earthing?
How much minimum insulation required between 11kv/3.3kv transformer windings?
What is corkscrew rule?
DESCRIBE THE CONSTRUCTION ANDOPERATION OF BELT CONVEYORS AND SCR CONVEYORS , DRAW NEAT SKETCHES
What is the formuala to calculate the rating of motor protection circuit breaker
What are the no-load losses for the 11000/415V transformer with the following rated capacity? 1.1500 kVA 2. 2000 kVA 3. 2500 kVA 4. 3000 kVA
A 50Hz,4-pole,3-phase,star-connected synchronous motor has a synchronous reactance of 12ohmsper phase and negligible armature resistances.the excitation is such as to give an open-circuit voltage of 13.2kilovolt.the motor is connected to 115kilovolt, 50hertz supplying. what maximum load can be the motor torque,line current and power factor?
what is earth pit , how we can measured it, what earth rods reference
how you taken aotitude test
If the line voltage is reduced to 75% of its rated value then by what percentage current will reduce ?? 75% 25% 50% no change and why ?
how to calculate regulation constants for over head lines? and what are the regulation constant for raccoon conductor at different voltage level and different P.F?
How to calculate the value of earth capacitance in a transmission line.