what is full form of dyn11( in transformer)
- 5 Answers
- 11568 Views
- Divis Laboratories, I also Faced
- E-Mail Answers
Answer Posted / meenakshi
i agree vid anil...to b more specific,Phase rotation is
always anti-clockwise. (international adopted convention)
we use the hour indicator as the indicating phase
displacement angle. Because there are 12 hours on a clock,
and a circle consists out of 360°, each hour represents
30°.
Thus 1 = 30°, 2 = 60°, 3 = 90°, 6 = 180° and 12 = 0° or
360°.
The minute hand is set on 12 o'clock and replaces the line
to neutral voltage (sometimes imaginary) of the HV winding.
This position is always the reference point.
Because rotation is anti-clockwise, 1 = 30° lagging (LV
lags HV with 30°)and 11 = 330° lagging or 30° leading (LV
leads HV with 30°)
| Is This Answer Correct ? | 7 Yes | 1 No |
Post New Answer View All Answers
i am in need of AC SYNCHRONUS MOTOR 30KW. ANY ONE KNOWS THE MANUFACTURER OF SAME. ALSO MOSFET AC CONVERTER 20KVA CONT.OUTPUT.
- two pumps must work with them at the same time but if the first pump start the second pump must delayed for some time to start also , with motor rated power = 90 KW and rated voltage = 380 V and rated power factor = 0.85 lag please draw the power and control circuit for it and determine all circuit components parameters that you use it
Why power genaration in India is at 50HZ while America its 60HZ
What is T’Q and X’Q and X’D ? and what is saturated as well as unsaturated ?
what is the difference between active power and reactive power and apparant power in practical as well as theoritical
how to calculate the capacitor to maintain power factor?
At the starting of dc motor and syn.motor and induction motor high current flowing through the winding. Due to this the windings burnt out. To avoid this different types of starters are used. But incase of transformer what Will be used (At starting no emf is induced in the primary winding)?
sir, iam a electrical engg graduate and i want to go in automation sector and for this i have decided to do industrial training for this,plz suggest me some good institute for the same in delhi,ncr. my degree percentage is 58%, can i get job after doing training, plz help....
Mention how NPN and PNP transistor works?
What do you mean by a current transformer?
Is it possible to make a 5P10/ CT Ratio 50/1A Burden 5VA
we have two motors 1250kW,6.6kV to be coupled on the same shaft ,so please provide assistance for their synchronisation.
anyone please send transformer parameter design formulas & details of tap changer ? plz i have interview this week its more helpful for me ?
What are the material used for resistor?
What are :- AC Distribution Board (Single & Double Front) DC Distribution Boards Distribution Board LT Breaker Panel.
