Laboratory experiments conducted in Mumbai on a particular
mix showed a
strength of 33 MP a for a fully matured concrete. Find
whether formworm
can be removed for an identical concrete placed at Jammu at
the age of 15
days when the average temperature is 60C. The stripping
stress in concrete
- 2 Answers
- 4116 Views
- CCIL, I also Faced
- E-Mail Answers
Answer Posted / buntychandwani
First thing the question is not completely and correctely
typed. The stripping stress in concrete in missing and also
how 60 deg temp will be possible in Jammu & Kashmir.
Let us connsider the Stripping stress of concrete as 25 Mpa
and average temp is 6 deg.
Now,
Maturity = Submission (time x temp)
= 15 x 24 x [6 - (11)]
= 6120 deg CH
Plowman's Constant given as A = 21 and B = 61
Se/S 15 = A + B Log10 [ M /1000]
Percentage of strength = 21 + 61 log(6120/1000)
= 68.99
The strength of Concrete at 15 days = 33 x (68.99/100)
= 22.76 Mpa
Since the strength of concrete is less than the stress to
which it is likely to be subjectd while stripping the
formwork, the concrete may fail. Therefore, the formwork
cannot be removed at 15 days time.
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
how many monpower required for 1 sqm normal RCC structure ( includes finishes & MEP )
In how many types u can do POP on ceiling and walls(on which material or by using which material)? b) what is the difference between dry , oil bound, enamel, acrlyic type of painting?
Whats be the minimum foundation depth of multistoried building as per height of building in individual footing?
Currently my house construction is going on but we just realized that the portico earth beam couldn't connect with the original earth because the beam rod not extended so Please advice
If we don't have drawing for Excavation of building,At what rule we will go for excavation and how much depth will go for a villa?
any book or article on pumped concrete.
how to calculate cut length of re-bar in a circle . because we not place same length of re-bar in whole circle maximum in center and minimum at corner so how to calculate middle bars???
residential projects,structural.
List out some of the software used in the construction sector to estimate cost and monitoring expenses?
What is the mix propotion of M10,M15,M20,M25,M30,M40,M50.M60 cement content,aggrigate,sand and water ratio.
Mention what are the composition of a landfill?
specifications of fe500 steel
how to find ssm in foundation?
what is right & short method of measurement of slab&beam
How to get MEP technical,instaaltion & testing data for interview?
