Answer Posted / sbrahman75
RAID 0 Concatenation/Striping
RAID 1 Mirroring
RAID 5-Striped array with rotating parity.
Concatenation: Concatenation is joining of two or more disk
slices to add up the disk space. Concatenation is serial in
nature i.e. sequential data operations are performed
serially on first disk then second disk and so on. Due to
serial nature new slices can be added up without having to
take the backup of entire concatenated volume, adding slice
and restoring backup.
Striping: Spreading of data over multiple disk drives mainly
to enhance the performance by distributing data in
alternating chunks - 16 k interleave across the stripes.
Sequential data operations are performed in parallel on all
the stripes by reading/writing 16k data blocks alternatively
form the disk stripes.
Mirroring: Mirroring provides data redundancy by
simultaneously writing data on to two sub mirrors of a
mirrored device. A submirror can be a stripe or concatenated
volume and a mirror can have three mirrors. Main concern
here is that a mirror needs as much as the volume to be
mirrored.
RAID 5: RAID 5 provides data redundancy and advantage of
striping and uses less space than mirroring. A RAID 5 is
made up of at least three disks, which are striped with
parity information written alternately on all the disks. In
case of a single disk failure the data can be rebuild using
the parity information from the remaining disks.
Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
what are the alarms in solaris?
What are the differences between the command line and graphical user interface?
How to add a new LUN in exit disksets (metasets) in solaris please answer me step by step procedure?
What does pkgadd command do?
How to configure email notification in solaris 8? We are using netbackup 5
Write the steps involved in creating and executing a program to implement the “case” command.
Which command is used to backup and restore solaris file system?
Hi We have upgraded our sun machine from solaris 9 to solaris 10. Before upgradation the date command output(Solaris 9) Wed Oct 13 09:45:21 IST 2010 But after upgradation the output for date is as below(solaris 10). Wednesday, October 13, 2010 9:46:14 AM IST Looks like I need to change LC_TIME=C. can you please help me how to change it for permanently
Where do you get Alarm prompt?
How can u find a file which is logged in last week?
please post step by step installation of packages from the EIS cd..
There are two nic cards on a sun server. I need to connect one nic to pupic ip and another nic to DMZ. Could you tell me how to configure step by step?
what is the difference between solaris8 and solaris9 and solaris10
After first installation of Solaris 10, what and all the Securities We need to set and how ?
How to make SUN server as router in subnetwork?