Which command allows a user to see previous commands?
A.) show command
B.) CTRL-P
C.) show history
D.) CTRL-U
E.) Up Arrow
F.) SHIFT-CTRL-6
- 1 Answers
- 3351 Views
- I also Faced
- E-Mail Answers
What does a metric of 16 hops represent when using RIP? A.) Number of hops to the destination B.) Destination unreachable C.) Number of routers D.) Bandwidth
Inverse ARP serves what purpose? A.) Method for a local router to introduce itself to the remote end of the connection B.) Broadcast a routing table update C.) Identify MAC addresses if the IP address is known D.) Sent every 10 seconds used to verify the Frame Switch is still active
Which address or number is used to pass the data to the correct application? MAC Number IP address Port Number Segment Number
Which OSI layer supports the communication component of an application? A.) Data-Link B.) Physical C.) Session D.) Presentation E.) Application F.) Transport
If a router uses static routing, how does it learn the route to remote networks? The router uses a RIP request to obtain remote network numbers. The router uses a routing protocol to exchange remote network numbers. The router uses DNS request packets to obtain remote network numbers. The Network Administrator manually configures the remote networks.
Two of the protocols that can be carried in the Protocol field of an IP packet are? A. TCP B. UDP C. FTP D. TFTP
Which defined peer ip address an local subnet belong to crete?
Select the fields for the Cisco HDLC protocol: A. Flag, Address, Control B. Flag, Address, Control, Protocol, LCP (Code, Identifier, Length, Data), FCS, Flag C. Flag, Address, Control, Data, FCS, Flag D. Flag, Address, Control, Proprietary, Data, FCS, Flag
Which protocol for PPP provides load balancing across multiple links? A. Multilink Protocol (MP) B. Quality C. Magic Number D. Stacker E. Predictor
Suppose we are having two Switches i.e. Switch1 & Switch2 Port1 of Switch1 is Connected to Uplink and switch2 is also connected to switch1? So 1>Is there is any loop? 2>How we come to know that there is a loop created? 3>If we add Switch3 to switch2 then there is a possibility of loop Creation?
What is BGP attribute & How many types of attributes are used by BGP???
5 Answers Hathway, HCL, Infinite Computer Solutions,
Hi, All I am configuring EIGRP in Packet tracer, after configuring all the things it is not working but in one condition it is working fine if i am putting all my router and network withing one network subnets e.g. 172.16.0.0 or 10.0.0.0 but whenever i am puting different network subnets e.g. in one network it is RA(config-if)#=ip address 10.0.0.1, and in fa0/0= 192.168.1.10 and in RB(config-if)#10.0.0.2 (s1/0) and in S1/1 11.0.0.1 and in fa 0/0 192.168.100.1 ,where as in third router RC(config-if)#=ip address 11.0.0.2 and in fa 0/0 172.16.1.10 and after configuring all this serial is showing up and protocol showing up but eigrp process not taking place after adding eigrp configuration, i tried with "no auto-summary" command but not working.. Suggest me where i missing something? can mail me at : gtech.innovator@gmail.com
CCNA 
