Sir i completed diploma in electrical from govt. Polytechnic dhanbad (jharkhand) . In 2012 . Now i am working in sail iisco plant . Sir i want to get electrical supervisory certificate for applying in ongc . From where i get this certificate please guide me procedure step by step
1 2742current transformer balance the power level on both sides. e.g in case of step up, at secondary side voltage rise but current decrease and vice versa in case of step down transformer. but how this power level remains same in case of current transformer and voltage transformer
1609Find the netid and hostid for the following classful IP addresses? i) 117.34.3.8 ii) 132.57.8.6 iii) 207.3.54.12
UOG,
2 14271Briefly define and explain the following different types of Pulse Amplitude Modulation (PAM) with some examples. i) 2-PAM ii) 4-PAM iii) 8-PAM iv) 16-PAM v) Quadrature Amplitude Modulation (QAM)
UOG,
2148What is the theoretical capacity of a channel in each of the following cases? i) Bandwidth: 20KHz SNR(dB) =40 ii) Bandwidth: 200KHz SNR(dB) =06 iii) Bandwidth: 1MHz SNR(dB) =20
UOG,
5266An ISP is granted a block of addresses starting with 150.80.0.0/16. The ISP wants to distribute these blocks to 2600 customers as follows. a) 200 medium size businesses; each needs 16 addresses b) 400 small businesses; each needs 8 addresses c) 2000 households; each needs 4 addresses Design the subblocks and give the slash notation for each subblock. Find out how many addresses are still available after these allocations.
UOG,
7709Myself completed B.Tech ECE in private university but i am working as an testing and commissioning engineer in electrical field whether i am eligibility to apply electrical licence.
1 2680Post New Electrical Engineering Questions
A Generator is in running condition and Rotor earth fault alarm is coming.How to check on line(i.e in running condition) whether there is actual earth fault in rotor or not.
how to remover corona effect and hysteresis losses from contactor
why d.c produces corrosion
Explain the propagation of harmonics in the network and influence of phase angle of harmonics.
dg started in plc mode and load taken later one battery terminal connection will be disconnected by loose connection what will happen for dg and shall we connect battery terminals while dg in load time?
What will be the impact on motor performance if a LT motor is rewound with changed motor winding data as given below:- Original winding data: total 04 wires = 02 wires of 17 SWG + 02 wires of 16.5 SWG. Changed Winding data: total 03 wires of 15.5 SWG wire size Motor rating: 160KW, 740RPM, 415V, ID FAN application. Normal Running Current = 95% of FL Current.
how can we calculate the ampacity of the electrical wire/cable. and what are the factors must be considered. pls. elaborate.
what is meant by impedance & transient protection?
When will you multiply and devide with derating factors to the actual value while sizing the cable?
Why are the laminations insulated from each other?
DIFFERENCE BETWEEN NORMAL TRAFO AND THRISTER TRAFO?
how we start 40w tube light with 4 diodes,2capacitors,1 choke and without starter.(a product avilable in market which lights burnt tube lights also)
What is Plank's Law?
sir pls send the je exam - 2008 and other model question papers..
Name a govt approved university which have 100% online engineering course.