Interested to Buy Any Domain ? << Click Here >> for more details...
why we r used DC megger insted of AC megger?
- 1 Answers
- 3863 Views
- Adani, I also Faced
- E-Mail Answers
Answer Posted / k.prakashchandra
To test insulation , you build voltage across it continuously over a period ,which is possible with DC only
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
What is meant by coupling capacitor?
what is earthing.how we make it,describe briefly.
Why star delta starter is preferred with induction motor?
How to calculate main incomer rating of APFC Panel ? Let's say i want to find main incomer for 11kV, 1000kVAR Panel.
What is Surge Capacitor? Why it is use in Generator Circuit Breaker?
how dose servo motor works
what is the illumination level required for child play area?
How does a television work?
How is efficiency of DG set calculated? At many places I found the efficiency to be mentioned in percentage. But at some other places I found kWH/ litres. I want to know how dimensionless percentage value is arrived at?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
list the advantages of RCCB over other circuit breakers?
I want to do a mini project. Now I'm studying in 6th semis tor EEE Engineering.
In Dyn11 power transformer if any one of the 3 phases connected to earth in star connected side then please explain effect of the current flow in delta connected side of transformer.(In this case if one phase is shorted to ground in star connected side then we observe the current flow in two phases only not three phases in delta connected primary side. Please explain why it is so?)
UG cable sizes were specified in sqmm. But practically its not coming to mesure. What's the reason for that? And how they specify the size of the cable?
i have install 750 kva distribution transformer at my site and want to do neutral earthing. what calculations should i follow to determine earthing conductor material and size?
