Interested to Buy Any Domain ? << Click Here >> for more details...
what is the meaning(definition)of EN grade of steel and also tell whats the full name of EN?
- 15 Answers
- 73600 Views
- Hitachi, Mecon, I also Faced
- E-Mail Answers
Answer Posted / jonathan
EN with a capital 'N' stands for Europäische Norm which translates to European Standard.
En with a lowercase 'n' stands for Emergency Number and was used as a designation for various steel grades in BS 970 until a formalised system was set up after the Second world War.
| Is This Answer Correct ? | 27 Yes | 3 No |
Post New Answer View All Answers
Explain some properties of manganese steel?
Define what is the grain size of lead as an element and as an alloy such as lead tin alloy?
Is there a possibility of inducing stress cracking in an insulated stainless road tanker vessel (20 tonne capacity) if the vessel is subject to rapid filling (10 tonne /hr) with liquid methane (-160 c) assuming the vessel is at ambient. If so, where could I obtain suggested cooling rates?
What are the chemical composition of cast iron grade 20
A cantilever beam carrying uniformly distributed load will be ?
What is recrystallization?
difference between sand casting and shell casting
What are the uses of electroplating?
what metal cord transfers electricity?
How do you classify shapers?
Which liquid can dissolve gold?
I currently use 17-7 PH stainless which is hardened to condition CH after forming. raw matl is .1.75"X .12" X .008". Its main usage after hardening is silicon wafer retainer where it's contantly cycled up and down to putin and remove wafer after 40-60 sec process at 400C temp. At this high temperature this part seemed to deform after a a couple of hundred wafer which is what it was designed for in the first place. THere is a proposal to go to a different material to increase lifeline of this part. My question is..... can 321 SST be a plugin replacement. I know this has a higher temp rating but how about its forming characteristics, will it have spring properties, and wont become brittle after prolonged exposure to 400C.
Define what is the difference between diagrams of it and ct in heat treatment of steels?
How much gold concentration should be in the organic phase (dbc) before reduction by oxalic acid solution? Is it effective on purity of gold in reduction step? Whatis the ratio of dbc to oxalic acid solution in this step?
How gold can be separated from mercury?
