3ph line voltage 220v, how can run a 220v single ph motor or Light?
Answer Posted / k.prakashchandra
Connect the motor to two phases
| Is This Answer Correct ? | 4 Yes | 1 No |
Post New Answer View All Answers
Can the output voltage of a rectifier be greater than the input AC voltage without the use of any voltage multiplier in the circuit??please provide the explanation too..
how can we phase identification in a distribution line,how we recognise that which phase is coming for a house hold connection.help me............
how to remover corona effect and hysteresis losses from contactor
what is method for testing CT
why we use two slope(differential & restraining) in differential relay.but in busbar protection differential we are using only one slope?please explain
Which capacitor is preferred for high voltage and frequency?
How should i design a 1ph & 3 ph transformer. Kindly let meknow all steps and formulaes related to design from scratch.
Is a contactor (or master relay) required between incoming lines and a VFD? The question goes to safety. If a contactor were used before the VFD and an e-stop engaged then the motor will coast to a stop (i.e. VFD loses power) instead of stopping much faster if the VFD braking fucntion were used. It would make more sense to keep power on the VFD.
Explain the construction of the conservator, operation and purpose, and draw the diagram of the conservator.
How to design a Unit auxiliary transformer for a power house having a unit of 65 MW and Generating voltage of 11 KV and Secondary voltage of 433V
which stabilizer is better ? AVR, Servo Stabilizer, Static stabilizer etc & why explain it
Calculate torque developed by the 3-phase, 5 H.P., 4 pole induction motor runs at 1500 rpm A 23 N-m B 21 N-m C 10 N-m D 0 N-m
why Current is lead 90 degree and voltage is lag 90 degree in a capacitor.? why Current is lag 90 degree and voltage is lead 90 degree in an inductor.?
which is the best institute for PLC,SCADA,DCS in hyderabad
HOW THE OLTC TRANSFORMER SAVE ENERGY IN COMPARISON TO OFF LINE TRANSFORMER AND IS IT ECONOMICAL TO REPLACE THE OFF LINE TRANSFORMER TO OLTC TRANSFORMER