Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / debashis paul
UPS - ARE USED FOR PROVIDING BACK UP TO SENSITIVE
ELECTRONIC DEVICES SUCH AS COMPUTER,SERVER,SENSORS,MEDICAL
EQUIPMENTS,TELECOMM ETC . REASON BEING UPS PROVIDES POWER
BACK UP WITHIN 1-10 MILI SECONDS.THIS GAP CANNOT BE SENSED
BY ABOVE MENTIONED DEVICES.THRERFORE THE DATA IS NOT LOST
AND IT DOES NOT REQUIRES REBOOTING .
INVERTERS ALSO PROVIDES POWER BACK UP DURING POWER
FAILURES,BUT THE TIME TAKEN FOR PROVING BACK IS 100-400-
MILLI SECONDS.TRANSFER TIME WILL AFFECT THE DEVICES.
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
where is the need for short circuit test for 3 see is required and why? can you explain in brief with application
EXPLAIN THE WORKING OF SERIES REACTOR IN HT CAPACITOR BANKS (FOR VOLTAGES & CURRENTS)
On what basis do you decide the ONAN (Oil Natural air natural) or Dry type transformer for a project?
if there is nutral in phase why we use earthing wire and grounding? even at fault condition the fault current flows to neutral (it is a lower path)
To prove the capacity of a 10MVA transforemr with 6.5% impedance by a short circuit test how much power is needed to inject an impedance voltage if we have to arrive for its rated current?
What is the different between digital phase converter and ordinary phase converter?
Please define ohm’s law for a.c (alternating current)?
how to calculate current and voltage in a same circuit?
I have been using an 600VA with 0.6 p.f UPS with my desktop which has 450W power supply unit. Can anyone explain how can this happen . Because the output of the UPS is 360W (600*0.6) (<450W)
Hoe do calculate the Cable size for Amps rating ?
What is the distance between body earthing and neutral earthing.?
why are the maintaine power factor and how can this control and this is how work.
1.why are not using acb 33kv ht side? is there any problem 2.what is difference between acb,vcb,sf6 breackers? 3.what is the function of invertor and convertor in ups?
Is there a possibility to use such a treshold voltage for the NMOS part of a CMOS circuit that during the switching it will start conducting only after the PMOS part will be already closed, by this eliminating the leakedge current? Please note, I'm not asking about the well bias in standby mode, but about the "antileakedge" measures during normal operation.
What are the advantages of thermal power plant?
