Interested to Buy Any Domain ? << Click Here >> for more details...
how we convert Mili ampere
to temp txt,level txt,flow txt,pressure txt range value
- 4 Answers
- 7049 Views
- Saadi Cement, I also Faced
- E-Mail Answers
Answer Posted / charankumar
in above answer1 why not max amp value should be 20ma
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
What are different types of valves?
I was working on calibrating turbidity transmitters endress+hauser at effluent polishing plant.We calibrated using NTU buffers.What happened is that when we immersed the sensor, everytime we raise and lower the sensor gradually, the reading will vary.my question is that is there any specifications on what is the required distance from the bottom of the container with buffer to the face of the sensor?Is it ok to install the sensor in a medium which has turbulence specially if bubbles are present?
i need some objective type questions in instrumentation
I have energy meter for educational project having 0.5s class but my friend need 0.2s class meter , which one is good for that purpose and what is the actual difference of that two classes , need very easy example also.??
what different types of problems do occur while doing instrumentation commisioning and how to solve them? please explain in detail
i want to find out iffco get test paper
what is the procedure for auto tune in masoneialn 12300 series displacer type transmitter?
Boolean algebra
Give an example where you had aproblem on the job, and tell me how you solved the problem. and the finalvoutcome.
Whatis the reset ofset and control system in instrumentation
why we use impulse line of flow transmitter at 45 deg. angle both side of orifice plate.
Why not come out analog output in ABB EL3020 when display show correct value
what is 24vdc live and dry supply
KAlman filter code for two dimension?
can anyone can let me know in Eurotron Micro cal 2+ calibrator in milli amps source mode we are not able to get 20 milli amps output it only produces 1.52 milli amps out, but display shows increase in milli amps , and err6 displays, let me know how to remove the err 6.
