Do you know how to measure the earth resistance? if so
explain it
Answer Posted / amit lukka
The answer written by By Mr.R. Sarkar & Mr. Dinesh R. are similar and correct, one thing is to be added that P2 and P3 are reference electrode and are placed 50 Ft. away from the pit and another reference will be 100 ft. from the pit and deep 1 meter.
Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
what is the calculation method to design core and winding of a 200kva 3phase distribution transformer?
If one tertiary phase i.e. R,Y or B is earthed of a loaded type tertiary delta connected (Without load)of a power auto transformer, what is its advantage/disadvantage?
what is maxemo work permit procedure
Importance of fault current in power transformers and how to monitor the same? How is it different from winding temperature?
What is pi controller?
hi, in the event earth grounding is not available in a project, is there any other way to make the elcb work? fyi, i have an instant water heater (6.5kw) installed, however if there is grounding in the heating element inside the heater assembly, i will get grounded. thank you in advance to those who will answer my question.
which mm cable should be used for 1.hp immersible pump motor for the distance of 330 metres?
What is the unit of charge and current?
how we arrange the hv side with delta connection in case 33/11kv of transformer.
How to work E.L.C.B and how to connect in circuit.
what is the difference between megger and earth resister ??
Explain the construction of the conservator, operation and purpose, and draw the diagram of the conservator.
what is control supply rating of a machine
what is the stear deltaprinceple?
what is acceptance test in electrical engineering.