If the damper winding on the rotor of a synchronous motor is
removed after starting what will happen?
- 7 Answers
- 12334 Views
- IOCL, I also Faced
- E-Mail Answers
Answer Posted / shailendra
in synchronous motor Damper winding mainly used to damp out the oscillation, which may occur due to any sudden load change, that's why its called DAMPER WINDING ( not a starting winding). but at the time of starting it is used as a starting winding also ( but this is not a primary use of it).
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
234 MVA Generator 3 phase Short circuit current Values required? Gen set Rating-234 MVA, Gen Voltage-18kv, PF;0.8, Xdv:23.5 %, Transformer Rating-18/380KV, 680MVA,Yndd1 two winding, Step up TR, ZT:35.50 %,X/R 4.33 Gen CB Position, CB open ,Disconnected open, Generator Running Voltage 18 Kv, Bi mistakes generator side earth switch Closed during that time short circuit current level in 3 Phase required, and how to test on site 234MVA Generator Short circuit current,
explain the process of commutation in a dc machine. Explain what are inter-poles and why they are required in a dc machine.
In the formula : Knee point voltage = Burden X alf / class, Please inform what is alf? regards Shashidhar M.R.
In ups static switch if i gives the supply at output end it will open the circuit in stactic switch or not if it will open then how it operates.
how to select battery for 15 KVA UPS with formula
In Generator How suction compression power and exhaust works ?
WHAT ARE THE DISADTAGES OF SINGLE-WIRE-EARTH-RETURN SYSTEM USED FOR RURAL ELECTRIFICATION?
what is the k var ratting of 1250kva
How can we design a HVAC Plant room which includes AHU,FCU,Chillers,Cooling towers, Pumps etc & how will they work? any Drawing if possible?
when we have to purchase the transformer by own i.e how much load will preferred HT connection?
How we can determine short circuiting current any plant and for example a plant which power generation is 415 volts and plant load is 500 kw.
how the aircraft outer body and inner body is separated ?
How to calculate the heat load for a electrical room
Whether should be the oil level in OCTC transfomer? It should be upto winding immersed completely or should be upto tap changer s/w? How it will affect the performance of the transformer. Rating may be 33KVA
what is the correct method for the outdoor termination of 19/33 KV HT cable step by step?
